Deploy advanced network capabilities with Cisco Modules & Cards used in Cisco routers, switches and other platforms.
Showing 1–16 of 100 results
Quick Spec
Brand | Cisco |
Model | MEM-4400-8G |
Memory Size | 8 GB |
Memory Type | DRAM |
Compatibility | Cisco ISR 4400 Series |
Product Features
- ● ● Enhanced memory capacity of 8 GB to support high-performance tasks.
- ● ● Single DIMM configuration for easy installation and maintenance.
- ● ● Optimized for Cisco ISR 4400 series for seamless integration.
- ● ● Spare part availability for quick replacements and upgrades.
- ● ● Ultra-reliable performance with Cisco engineering quality.
Product Applications
- ● ● Expanding the memory of Cisco ISR 4400 routers to support more advanced networking tasks.
- ● ● Upgrading existing Cisco ISR 4400 routers to handle increased data loads and network traffic.
- ● ● Ensuring high availability and reliability in disaster recovery scenarios with a reliable spare part.
Supported Options
Accessory | Model |
Flash Memory | MEM-FLSH-4GB |
Router Power Supply | PWR-4400-AC |
Network Module | NIM-2FXS |
Compare to Similar Items
Model | Differences |
MEM-4400-4G | 4 GB DRAM, half the memory capacity of MEM-4400-8G. |
MEM-4300-8G | Optimized for ISR 4300 Series, not compatible with ISR 4400 Series. |
MEM-4400-16G | 16 GB DRAM, double the memory capacity of MEM-4400-8G. |
Quick Spec
Brand | Cisco |
Model | MEM-4400-4G |
Capacity | 4G (2G+2G) |
Compatibility | Cisco ISR 4400 Series |
Form Factor | DRAM |
Product Features
- ● ● High-performance 4G DRAM (2G+2G) for enhanced network speed and reliability.
- ● ● Specifically designed for seamless integration with Cisco ISR 4400 Series routers.
- ● ● Boosts data processing speed for demanding applications.
- ● ● Reliable and efficient, with a focus on minimizing downtime.
- ● ● Easy installation and upgrade path to extend the routers capabilities.
Product Applications
- ● ● Optimizing performance for enterprise network environments that require high data throughput.
- ● ● Providing a reliable solution for service providers managing extensive data traffic.
- ● ● Enhancing the capability of educational institutions to manage e-learning platforms and resources efficiently.
Supported Options
Cisco Router | ISR 4451-X/K9 |
Flash Memory | MEM-FLSH-4G |
WAN Interface Card | NIM-2MFT-T1/E1 |
Compare to Similar Items
Model | Difference |
MEM-4431-4G | Supports only Cisco ISR 4431 |
MEM-4451-2G | Lower capacity of 2G DRAM |
MEM-4211-4G | Designed for Cisco ISR 4200 series routers |
Quick Specs
Figure 1 shows the appearance of WS-X6816-10T-2T. Table 1 shows the Quick Specs.Product Code | WS-X6816-10T-2T |
Description | 6800 Series 16-Port 10 Gigabit Ethernet Copper Module with DFC4 & DFC4XL |
Feature | 16-Port 10GbE Copper Module |
Ports | 16 |
Optics | Copper (RJ-45) connectors |
Switch fabric connection | 2 x 20 Gbps (40 Gbps total) |
Oversubscription | 4:1 16 ports (oversubscription mode) 1:1 4 ports (performance mode) |
Forwarding engine |
|
Queues | Oversubscription mode:
|
Queuing mechanisms |
|
Scheduler | Oversubscription mode:
|
Port buffers | Oversubscription mode:
|
Hardware-based multicast replication |
|
Jumbo frame support for bridged and routed packets | Up to 9216 bytes |
Maximum port density per chassis | 176 ports (6513-E chassis) 128 ports (6509-E chassis) |
Maximum port density per VSS | 352 ports |
Can be used to form virtual switch link |
|
Supervisor engines supported | Catalyst 6500 Supervisor Engine 2T and 2TXL |
Chassis supported |
|
Slot requirements |
|
Onboard memory | 1 GB default |
Cabling Supported | Category 6, 6A UTP & STP & Category 7 STP copper cabling |
Compare to Similar Items
Table 2 shows the comparison of WS-X6816-10G-2T, WS-X6816-10G-2TXL and WS-X6816-10T-2T.
Product Code | WS-X6816-10G-2T | WS-X6816-10G-2TXL | WS-X6816-10T-2T |
Description | 6800 Series 16-Port 10 Gigabit Ethernet Fiber Module with DFC4 & DFC4XL | 16-port 10 Gigabit Ethernet Fiber Module DFC4XL | 6800 Series 16-Port 10 Gigabit Ethernet Copper Module with DFC4 & DFC4XL |
Quick Specs
Figure 1 shows the appearance of WS-X6904-40G-2T. Table 1 shows the Quick Specs.Product Code | WS-X6904-40G-2T |
Power requirements | 468 watts |
Product Description | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6904-40G-2T |
Devide Tyde | 10 Gigabit Ethernet interface Fiber module |
Ports | 4 * 40G Gigabit Ethenet or 16 * 10 Gigabit Ethernet |
switch fabric connection | CFP-40G-LR4, 40G-CFP-SR4 FourX converter for 10 Gigabit Ethernet SFP+ |
Forwarding Engine | WS-F6K-DFC4-E |
ACL entries | 64000 |
Netflow entries | 512000 |
Routing entries | 256000 |
Bridge Domains | 16000 |
MAC address | 128000 |
Multicast routing | 256000 |
IPv4 forwarding speed | 60 Mpps |
The Modules, Cards, Licenses
Table 2. Supported Optics for WS-X6904-40G-2T.
Product ID | Transceiver Type | Media Type | Distance |
CFP-40G-SR4 | 40GBASE-SR4 (MMF) | Multimode Fiber 850nm | 100m over OM3 Multimode Fiber |
CFP-40G-LR4 | 40GBASE-LR4 (SMF) | Single Mode Fiber 1310nm CWDM | 10 km |
CVR-CFP-410GSFP | FourX Adapter: Converts each 40 GE CFP port to 4 10 GE SFP+ ports or 4 1GE SFP ports | N/A | N/A |
SFP-10G-SR SFP-10G-LR SFP-10G-LRM SFP-10G-ER SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M | Supported SFP+ transceivers with FourX adapter | MMF (OM3) SMF (G.652) MMF (FDDI grade) SMF(G.652) Copper TwinAx cable Copper TwinAx cable Copper TwinAx cable | Up to 300m 10km 220m 40km 1m 3m 5m |
GLC-SX-MMD GLC-LH-SMD GLC-T | Supported SFP transceivers with FourX adapter | MMF (50 μm/ 62.5 μm FDDI) SMF/MMF Category 5 unshielded twisted pair copper cabling | 550m/220m 10km (SMF)/550m (MMF) 100m |
Compare to Similar Items
Table 3 shows the comparison of WS-X6904-40G-2T and WS-X6908-10G-2T.
Product Code | WS-X6904-40G-2T | WS-X6908-10G-2T |
Product Description | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6904-40G-2T | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6908-10G-2T |
Power requirements | 468 watts | 588 Watts |
Quick Specs
Figure 1 shows the appearance of N55-M16UP=. Table 1 shows the Quick Specs.Product Code | N55-M16UP= |
Product Name | 16-Port Unified Port Expansion Module |
Product Type | Expansion Module |
Application/Usage | Data Networking Switching Network |
Number of Total Expansion Slots | 16 |
Form Factor | Hot-swappable |
Compatibility | Nexus 5548UP Switch Nexus 5596UP Switch |
Product Details
Figure 2 shows the front panel of N55-M16UP=. Note:① | 16 10-Gigabit Ethernet and FCoE ports |
② | Captive screw that locks the ejector lever |
Compare to Similar Items
Table 2 shows the comparison of N55-M16UP= and N55-M160L3-V2=.Product Code | N55-M16UP= | N55-M160L3-V2= |
Product Name | 16-Port Unified Port Expansion Module | Layer 3 GEM |
Product Type | Expansion Module | Expansion Module |
Form Factor | Hot-swappable | Hot-swappable |
Compatibility | Nexus 5548UP Switch Nexus 5596UP Switch | Cisco Nexus 5596 Switch |
- ● 8 T1/E1 ports
- ● Multiflex trunk support
- ● Channelized data
- ● Voice and data integration
- ● Scalable infrastructure
Feature | Cisco NIM-8CE1T1-PRI | ISR 4431 | NIM-4E/M | SM-X-ES3-16-P | NIM-2CE1T | VG350 | ISR 4321 |
---|---|---|---|---|---|---|---|
Ports | 8 | 2 | 4 | 16 | 2 | 48 | 2 |
Data Type | Channelized | Ethernet | Ethernet | Ethernet | Channelized | Voice | Composite |
Voice Support | Yes | Yes | No | No | Yes | Yes | No |
Network Module | Yes | Yes | Yes | No | Yes | No | Yes |
Max Bandwidth | 1.5 Mbps | 2 Gbps | 1 Gbps | 10 Gbps | 1.5 Mbps | 1 Gbps | 1 Gbps |
Scalability | High | Medium | Medium | High | Low | Medium | Medium |
- ● Enterprise voice and data integration
- ● Medium to large business networks
- ● Unified communication infrastructures
Model | Description |
---|---|
SM-NM-ADPTR | Network Module Adapter for Mixed Environments |
NIM-2CE1T1-PRI | 2 port Multiflex Trunk Voice/Data T1/E1 Module |
VWIC3-4MFT-T1/E1 | 4-port Multiflex Trunk Voice/Data T1/E1 Module |
Quick Spec
Table 1 shows the quick spec.Product Code | HWIC-1CE1T2-PRI |
Description | 2 port channelized T1/E1, and PRI HWIC (data only) Cisco Router High-Speed WAN Interface card |
Remote Management | Cisco CNS 2100 Series Intelligence Engine (IE2100) CiscoWorks |
Signaling Debugging | ISDN Q.921 and Q.931 decode All other previously existing applicable Cisco IOS Software debugs |
Dimensions (H x W x D) | HWIC-2CE1T1-PRI: 0.75 x 3.08 X 4.74 in. (1.91 x 7.82 x 12.04 cm) |
Weight | HWIC-2CE1T1-PRI: 0.19 lb (0.09 kg) |
Supported Devices
Table 2 shows the Supported Devicesfor theHWIC-2CE1T1-PRI.Product number | Description |
CISCO2801 | Cisco 2801 router 2801 w/AC PWR, 2FE,4slots(2HWIC), 2PVDM, 2AIM, IP BASE, 128F/384D |
CISCO2901/K9 | Cisco 2901 router w/2 GE,4 EHWIC,2 DSP,256MB CF,512MB DRAM,IP Base |
CISCO3825 | 3825 w/AC PWR, 2GE,1SFP, 2NME, 4HWIC, IP Base, 128F/512D |
CISCO3925/K9 |
Cisco 3925 Router w/SPE100(3GE,4EHWIC,4DSP,2SM,256MBCF,1GBDRAM,IPB) |
Quick Specs
Figure 1 shows the appearance of SM-ES3G-16-P. Table 1 shows the Quick Specs.Model | SM-ES3G-16-P |
Gigabit Ethernet Ports | 16 |
Layer 2/3 Switching | X |
PoE | X |
Service Module Width | Single |
Default Software | Universal Image: IP Base |
Minimum Cisco EtherSwitch and Cisco IOS Software Release | 12.2(52)EX |
Minimum Router Cisco IOS Software Release | 15(0).1M |
Dimensions: Wide x Deep x High (cm.) | 20.6 x 20.7 x 4.0 |
Weight (kg.) | 2.2 |
Operational Temperature | 0 to 40 °C |
Nonoperational Temperature | -40 to 70 °C |
Operational Humidity | 5 to 90% |
Nonoperational Humidity | 5 to 95% |
Quick Specs
Product Code | SPA-5X1GE-V2 |
Product compatibility |
|
Port density per SPA | 2*, 5, 8, or 10 Gigabit Ethernet ports * Usable in combination of SFP and RJ-45 ports for a total of 2 Gigabit Ethernet ports |
Physical interfaces |
|
Reliability and availability |
|
Physical specifications |
|
Power |
|
The Features
Figure 1 shows the EHWIC-4ESG ☆ 4 × 10/100/1000 switch ports ☆ Layer 2 switching features such as port autosensing, IEEE802.1P, IEEE802.1x, SNMPV1,V2,V3, QoS, VlAN trunking, STP ☆ 8 QoS queues per port, Shaped Deficit Weighted Round Robin (SDWRR), dynamic secure port, intrachassis cascading ☆ Supports redundancy protocol such HSRP, VRRP and BLGP ☆ Offers IP routing, and voice gateway capability into a single chassis to accommodate; the needs for high traffic data from the small to medium-sized business or enterprise branch-office.The Supported Routers
Figure 2 shows that EHWIC-4ESG can be installed in the Cisco ISR G2 routers. Table 1 shows Cisco Gigabit Ethernet EHWIC Support Comparison. These routers all support EHWIC-4ESG.Supported Platforms | Number of Modules Supported |
Cisco 3945E ISR | 3 |
Cisco 3925E ISR | 3 |
Cisco 3945 ISR | 4 |
Cisco 3925 ISR | 4 |
Cisco 2951 ISR | 4 |
Cisco 2921 ISR | 4 |
Cisco 2911 ISR | 4 |
Cisco 2901 ISR | 4 |
Cisco 1941W ISR | 2 |
Cisco 1941 ISR | 2 |
Cisco 1921 ISR | 1 |
The Supported SFP Transceiver Module
Table 2 shows the Supported SFP Transceiver module on the EHWIC-4ESG.Models | Description |
GLC-LH-SMD | 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
GLC-SX-MMD | 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
GLC-T | 1000BASE-T SFP |
Compare to Similar Item
Table 3 shows the comparison between EHWIC-1GE-SFP-CU and EHWIC-4ESG.Models | EHWIC-1GE-SFP-CU | EHWIC-4ESG |
Product Type: | Enhanced HWIC Interface Card | Enhanced HWIC Interface Card |
Interfaces/Ports | 1 x 10/100/1000Base-T LAN | 4 x 10/100/1000Base-T WAN |
Application/Usage: | Data Networking Wide Area Network Optical Network | Data Networking Wide Area Network |
Quick Specs
Figure 1 shows the appearance of EHWIC-VA-DSL-A. Table 1 shows the Quick Specs.
DSL Specifications |
|
Multimode DSL (VDSL2 and ADSL2/2+) |
|
The Features
Figure 1 shows the EHWIC-1GE-SFP-CU. ☆ 1 10/100/1000 Base-T port ☆ 1 dual mode SFP port ☆ Digital Optical Monitoring (DOM) ☆ Single-wide EHWIC, but no slot restrictions ☆ Low-cost, high-speed, and long-distance connectivity for Cisco ISRs, interoffice connectivity to avoid expensive leased lines ☆ Either the SFP or the RJ-45 Port can be available, 1 port active The single-port can be activated when integrate with Cisco Integrated Service Router Generation 2 (ISR G2). EHWIC-1GE-SFP-CU has SFP port and RJ-45 copper port where either the SFP (mini-GBIC) or the RJ-45 can be active, but not both at the time.The Supported Routers
Figure 2 shows that EHWIC-1GE-SFP-CU can be installed in the Cisco ISR G2 routers. The enhanced High-speed performance of Gigabit Ethernet in Cisco ISR G2 routers brings new features and provides more capacity for existing IVR and more bridging capabilities. The flexible design EHWIC-1GE-SFP-CU Gigabit Ethernet card enables branch office to cost-effectively by using high-speed uplinks connect to Ethernet WAN layer 2 and 3 services in various environments. Table 1 shows Cisco Gigabit Ethernet EHWIC Support Comparison. These routers all support EHWIC-1GE-SFP-CU.Supported Platforms | Number of Modules Supported |
Cisco 3945E ISR | 3 |
Cisco 3925E ISR | 3 |
Cisco 3945 ISR | 4 |
Cisco 3925 ISR | 4 |
Cisco 2951 ISR | 4 |
Cisco 2921 ISR | 4 |
Cisco 2911 ISR | 4 |
Cisco 2901 ISR | 4 |
Cisco 1941W ISR | 2 |
Cisco 1941 ISR | 2 |
Cisco 1921 ISR | 1 |
The Supported SFP Transceiver module
Table 2 shows the Supported SFP Transceiver module on the EHWIC-1GE-SFP-CU.Models | Description |
GLC-LH-SMD | 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
GLC-SX-MMD | 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
GLC-T | 1000BASE-T SFP |
Compare to Similar Item
Table 3 shows the comparison between EHWIC-1GE-SFP-CU and EHWIC-4ESG.Models | EHWIC-1GE-SFP-CU | EHWIC-4ESG |
Product Type: | Enhanced HWIC Interface Card | Enhanced HWIC Interface Card |
Interfaces/Ports | 1 x 10/100/1000Base-T LAN | 4 x 10/100/1000Base-T WAN |
Application/Usage: | Data Networking Wide Area Network Optical Network | Data Networking Wide Area Network |
Quick Specs
Figure 1 shows the appearance of VWIC3-1MFT-T1/E1. Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements.
VWIC3-1MFT-T1/E1 |
|
Cisco 1900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Cisco 2900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Cisco 3900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Part Number |
Number of Ports |
T1 Support |
E1 Support |
Unstructured E1 (G.703) Support |
Data Support WIC Mode |
Voice Support VIC* |
Drop-and-Insert Multiplexing |
VWIC3-1MFT-T1/E1 |
1 |
Yes |
Yes |
No |
Yes |
Yes |
Yes |
Configuration Description |
1-port Cards VWIC3-1MFT-T1/E1, VWIC3-1MFT-G703 |
Data Only |
|
Serial Data (channel-group*) |
2 total 2 per port |
Voice Only |
|
Voice CAS (ds0-group) |
24 total (T1) 31 total (E1) 1 per timeslot |
Voice, Video and Data |
|
PRI (pri-group*) |
1 total 1 per port |
Drop & Insert (tdm-group) |
24 total (T1) 31 total (E1) 1 per timeslot |
Quick Specs
Figure 1 shows the appearance of VWIC3-2MFT-T1/E1. Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release .
Part Number |
VWIC3-2MFT-T1/E1 |
Cisco 1900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Cisco 2900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Cisco 3900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
* VWIC3-4MFT-T1/E1is supported on Cisco 2911, 2921, 2951 and Cisco 3900 Series routers
Table 2. Cisco MFT VWIC3 Card Feature Comparison.
Part Number |
VWIC3-2MFT-T1/E1 |
Number of Ports |
2 |
T1 Support |
Yes |
E1 Support |
Yes |
Unstructured E1 (G.703) Support |
No |
Data Support WIC Mode |
Yes |
Voice Support VIC* |
Yes |
Drop-and-Insert Multiplexing |
Yes |
Configuration Description |
2-port Cards VWIC3-2MFT-T1/E1, VWIC3-2MFT-G703 |
Data Only |
|
Serial Data (channel-group*) |
2 total 2 per port |
Voice Only |
|
Voice CAS (ds0-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
Voice, Video and Data |
|
PRI (pri-group*) |
2 total 1 per port |
Drop & Insert (tdm-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
* Channel Group refers to bonding of one or more timeslots into a single HDLC-framed serial connection for IP data traffic connectivity. This is used for HDLC, Frame Relay and MLPPP serial WAN connections.
Ds0 Group refers to Bonding of one or more timeslots into a single TDM voice connection using Channel Associated Signaling (CAS) such as E&M, FXS or FXO. This is used for TDM PBX or PSTN connections and typically deployed only on T1.
* PRI Group refers to bonding of two or more timeslots into a single TDM connection using ISDN signaling. This is typically used for TDM PBX or PSTN voice and video connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice, video or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1, and channel 31 on an E1.
TDM Group refers to cross-connecting one or more timeslots from one TDM interface to another. This is used to groom channels from different access points onto a combined T1 or E1 uplink. Since the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice, video and data) is transparent to the router.
Quick Spec
Brand | Cisco |
Model | VWIC3-1MFT-G703 |
Interface Type | T1/E1 |
Compatibility | Cisco ISR G2 Routers |
Form Factor | Plug-in module |
Product Features
- ● ● Supports both data and voice applications
- ● ● Integrated T1/E1 and G.703 connectivity
- ● ● High-density design for efficient use of router slots
- ● ● Flexible configuration options
- ● ● Enhanced voice quality and data transmission rates
Product Applications
- ● ● Voice over IP (VoIP) deployment in medium to large enterprises
- ● ● High-speed data transmission for remote office connectivity
- ● ● Enhanced WAN connectivity for branch offices
Supported Options
Accessory | Model |
Cable | CAB-E1-RJ45BNC |
Transceiver Module | GLC-T |
Interface Card | EHWIC-1GE-SFP-CU |
Compare to Similar Items
Model | Difference |
VWIC3-2MFT-T1/E1 | Supports dual T1/E1 ports |
VWIC2-1MFT-G703 | Previous generation with lower performance |
HWIC-1DSU-T1 | T1 support only, does not support E1 or voice functionalities |
Quick Specs
Figure 1 shows the appearance of VWIC3-2MFT-G703. Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements.
VWIC3-2MFT-G703 |
|
Cisco 1900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Cisco 2900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Cisco 3900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
Part Number |
Number of Ports |
T1 Support |
E1 Support |
Unstructured E1 (G.703) Support |
Data Support WIC Mode |
Voice Support VIC* |
Drop-and-Insert Multiplexing |
VWIC3-1MFT-G703 |
1 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
VWIC3-2MFT-G703 |
2 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Configuration Description |
2-port Cards VWIC3-2MFT-T1/E1, VWIC3-2MFT-G703 |
Data Only |
|
Serial Data (channel-group*) |
2 total 2 per port |
Voice Only |
|
Voice CAS (ds0-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
Voice, Video and Data |
|
PRI (pri-group*) |
2 total 1 per port |
Drop & Insert (tdm-group) |
48 total (T1) 62 total (E1) 1 per timeslot |