No products in the cart.
Showing 33–48 of 210 results
The Features
Figure 1 shows the EHWIC-4ESG ☆ 4 × 10/100/1000 switch ports ☆ Layer 2 switching features such as port autosensing, IEEE802.1P, IEEE802.1x, SNMPV1,V2,V3, QoS, VlAN trunking, STP ☆ 8 QoS queues per port, Shaped Deficit Weighted Round Robin (SDWRR), dynamic secure port, intrachassis cascading ☆ Supports redundancy protocol such HSRP, VRRP and BLGP ☆ Offers IP routing, and voice gateway capability into a single chassis to accommodate; the needs for high traffic data from the small to medium-sized business or enterprise branch-office.The Supported Routers
Figure 2 shows that EHWIC-4ESG can be installed in the Cisco ISR G2 routers. Table 1 shows Cisco Gigabit Ethernet EHWIC Support Comparison. These routers all support EHWIC-4ESG.| Supported Platforms | Number of Modules Supported |
| Cisco 3945E ISR | 3 |
| Cisco 3925E ISR | 3 |
| Cisco 3945 ISR | 4 |
| Cisco 3925 ISR | 4 |
| Cisco 2951 ISR | 4 |
| Cisco 2921 ISR | 4 |
| Cisco 2911 ISR | 4 |
| Cisco 2901 ISR | 4 |
| Cisco 1941W ISR | 2 |
| Cisco 1941 ISR | 2 |
| Cisco 1921 ISR | 1 |
The Supported SFP Transceiver Module
Table 2 shows the Supported SFP Transceiver module on the EHWIC-4ESG.| Models | Description |
| GLC-LH-SMD | 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
| GLC-SX-MMD | 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
| GLC-T | 1000BASE-T SFP |
Compare to Similar Item
Table 3 shows the comparison between EHWIC-1GE-SFP-CU and EHWIC-4ESG.| Models | EHWIC-1GE-SFP-CU | EHWIC-4ESG |
| Product Type: | Enhanced HWIC Interface Card | Enhanced HWIC Interface Card |
| Interfaces/Ports | 1 x 10/100/1000Base-T LAN | 4 x 10/100/1000Base-T WAN |
| Application/Usage: | Data Networking Wide Area Network Optical Network | Data Networking Wide Area Network |
Quick Specs
Figure 1 shows the appearance of EHWIC-VA-DSL-A. Table 1 shows the Quick Specs.|
DSL Specifications |
|
|
Multimode DSL (VDSL2 and ADSL2/2+) |
|
The Features
Figure 1 shows the EHWIC-1GE-SFP-CU. ☆ 1 10/100/1000 Base-T port ☆ 1 dual mode SFP port ☆ Digital Optical Monitoring (DOM) ☆ Single-wide EHWIC, but no slot restrictions ☆ Low-cost, high-speed, and long-distance connectivity for Cisco ISRs, interoffice connectivity to avoid expensive leased lines ☆ Either the SFP or the RJ-45 Port can be available, 1 port active The single-port can be activated when integrate with Cisco Integrated Service Router Generation 2 (ISR G2). EHWIC-1GE-SFP-CU has SFP port and RJ-45 copper port where either the SFP (mini-GBIC) or the RJ-45 can be active, but not both at the time.The Supported Routers
Figure 2 shows that EHWIC-1GE-SFP-CU can be installed in the Cisco ISR G2 routers. The enhanced High-speed performance of Gigabit Ethernet in Cisco ISR G2 routers brings new features and provides more capacity for existing IVR and more bridging capabilities. The flexible design EHWIC-1GE-SFP-CU Gigabit Ethernet card enables branch office to cost-effectively by using high-speed uplinks connect to Ethernet WAN layer 2 and 3 services in various environments. Table 1 shows Cisco Gigabit Ethernet EHWIC Support Comparison. These routers all support EHWIC-1GE-SFP-CU.| Supported Platforms | Number of Modules Supported |
| Cisco 3945E ISR | 3 |
| Cisco 3925E ISR | 3 |
| Cisco 3945 ISR | 4 |
| Cisco 3925 ISR | 4 |
| Cisco 2951 ISR | 4 |
| Cisco 2921 ISR | 4 |
| Cisco 2911 ISR | 4 |
| Cisco 2901 ISR | 4 |
| Cisco 1941W ISR | 2 |
| Cisco 1941 ISR | 2 |
| Cisco 1921 ISR | 1 |
The Supported SFP Transceiver module
Table 2 shows the Supported SFP Transceiver module on the EHWIC-1GE-SFP-CU.| Models | Description |
| GLC-LH-SMD | 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
| GLC-SX-MMD | 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
| GLC-T | 1000BASE-T SFP |
Compare to Similar Item
Table 3 shows the comparison between EHWIC-1GE-SFP-CU and EHWIC-4ESG.| Models | EHWIC-1GE-SFP-CU | EHWIC-4ESG |
| Product Type: | Enhanced HWIC Interface Card | Enhanced HWIC Interface Card |
| Interfaces/Ports | 1 x 10/100/1000Base-T LAN | 4 x 10/100/1000Base-T WAN |
| Application/Usage: | Data Networking Wide Area Network Optical Network | Data Networking Wide Area Network |
Quick Specs
Figure 1 shows the appearance of VWIC3-1MFT-T1/E1. Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements.|
VWIC3-1MFT-T1/E1 |
|
|
Cisco 1900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Cisco 2900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Cisco 3900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Part Number |
Number of Ports |
T1 Support |
E1 Support |
Unstructured E1 (G.703) Support |
Data Support WIC Mode |
Voice Support VIC* |
Drop-and-Insert Multiplexing |
|
VWIC3-1MFT-T1/E1 |
1 |
Yes |
Yes |
No |
Yes |
Yes |
Yes |
|
Configuration Description |
1-port Cards VWIC3-1MFT-T1/E1, VWIC3-1MFT-G703 |
|
Data Only |
|
|
Serial Data (channel-group*) |
2 total 2 per port |
|
Voice Only |
|
|
Voice CAS (ds0-group) |
24 total (T1) 31 total (E1) 1 per timeslot |
|
Voice, Video and Data |
|
|
PRI (pri-group*) |
1 total 1 per port |
|
Drop & Insert (tdm-group) |
24 total (T1) 31 total (E1) 1 per timeslot |
Quick Specs
Figure 1 shows the appearance of VWIC3-2MFT-T1/E1. Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release .|
Part Number |
VWIC3-2MFT-T1/E1 |
|
Cisco 1900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Cisco 2900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Cisco 3900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
* VWIC3-4MFT-T1/E1is supported on Cisco 2911, 2921, 2951 and Cisco 3900 Series routers
Table 2. Cisco MFT VWIC3 Card Feature Comparison.|
Part Number |
VWIC3-2MFT-T1/E1 |
|
Number of Ports |
2 |
|
T1 Support |
Yes |
|
E1 Support |
Yes |
|
Unstructured E1 (G.703) Support |
No |
|
Data Support WIC Mode |
Yes |
|
Voice Support VIC* |
Yes |
|
Drop-and-Insert Multiplexing |
Yes |
|
Configuration Description |
2-port Cards VWIC3-2MFT-T1/E1, VWIC3-2MFT-G703 |
|
Data Only |
|
|
Serial Data (channel-group*) |
2 total 2 per port |
|
Voice Only |
|
|
Voice CAS (ds0-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
|
Voice, Video and Data |
|
|
PRI (pri-group*) |
2 total 1 per port |
|
Drop & Insert (tdm-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
* Channel Group refers to bonding of one or more timeslots into a single HDLC-framed serial connection for IP data traffic connectivity. This is used for HDLC, Frame Relay and MLPPP serial WAN connections.
Ds0 Group refers to Bonding of one or more timeslots into a single TDM voice connection using Channel Associated Signaling (CAS) such as E&M, FXS or FXO. This is used for TDM PBX or PSTN connections and typically deployed only on T1.
* PRI Group refers to bonding of two or more timeslots into a single TDM connection using ISDN signaling. This is typically used for TDM PBX or PSTN voice and video connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice, video or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1, and channel 31 on an E1.
TDM Group refers to cross-connecting one or more timeslots from one TDM interface to another. This is used to groom channels from different access points onto a combined T1 or E1 uplink. Since the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice, video and data) is transparent to the router.
Quick Spec
| Brand | Cisco |
| Model | VWIC3-1MFT-G703 |
| Interface Type | T1/E1 |
| Compatibility | Cisco ISR G2 Routers |
| Form Factor | Plug-in module |
Product Features
- ● ● Supports both data and voice applications
- ● ● Integrated T1/E1 and G.703 connectivity
- ● ● High-density design for efficient use of router slots
- ● ● Flexible configuration options
- ● ● Enhanced voice quality and data transmission rates
Product Applications
- ● ● Voice over IP (VoIP) deployment in medium to large enterprises
- ● ● High-speed data transmission for remote office connectivity
- ● ● Enhanced WAN connectivity for branch offices
Supported Options
| Accessory | Model |
| Cable | CAB-E1-RJ45BNC |
| Transceiver Module | GLC-T |
| Interface Card | EHWIC-1GE-SFP-CU |
Compare to Similar Items
| Model | Difference |
| VWIC3-2MFT-T1/E1 | Supports dual T1/E1 ports |
| VWIC2-1MFT-G703 | Previous generation with lower performance |
| HWIC-1DSU-T1 | T1 support only, does not support E1 or voice functionalities |
Quick Specs
Figure 1 shows the appearance of VWIC3-2MFT-G703. Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements.|
VWIC3-2MFT-G703 |
|
|
Cisco 1900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Cisco 2900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Cisco 3900 Chassis EHWIC Slots |
15.0(1)M3, 15.1(1)T1, 15.1(2)T |
|
Part Number |
Number of Ports |
T1 Support |
E1 Support |
Unstructured E1 (G.703) Support |
Data Support WIC Mode |
Voice Support VIC* |
Drop-and-Insert Multiplexing |
|
VWIC3-1MFT-G703 |
1 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
VWIC3-2MFT-G703 |
2 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Configuration Description |
2-port Cards VWIC3-2MFT-T1/E1, VWIC3-2MFT-G703 |
|
Data Only |
|
|
Serial Data (channel-group*) |
2 total 2 per port |
|
Voice Only |
|
|
Voice CAS (ds0-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
|
Voice, Video and Data |
|
|
PRI (pri-group*) |
2 total 1 per port |
|
Drop & Insert (tdm-group) |
48 total (T1) 62 total (E1) 1 per timeslot |
SM-D-ES3G-48-P Product Highlights
SM-D-ES3G-48-P Product Application Scenarios
- ● Layer 2 & 3 Switching
- ● 48 x Gigabit Ethernet Ports
- ● 2 x SFP Ports
- ● PoE Capability
- ● High-Density Integration
| Feature | Cisco SM-D-ES3G-48-P | Cisco SM-X-ES3-24-P | Cisco C3650-48PS-E | Juniper EX4300-48T | Arista 7050S-64 | HP 2920-48G-PoE+ |
|---|---|---|---|---|---|---|
| Ethernet Ports | 48 | 24 | 48 | 48 | 48 | 48 |
| SFP Ports | 2 | 2 | 4 | 4 | 4 | 2 |
| PoE Support | Yes | Yes | Yes | No | No | Yes |
| Layer Switching | Layer 2 & 3 | Layer 2 & 3 | Layer 3 | Layer 3 | Layer 3 | Layer 2 & 3 |
| Power Supply | AC/DC | AC/DC | AC/DC | AC/DC | AC/DC | AC |
- ● Small to medium-sized businesses
- ● Campus networking deployments
- ● High-density access points
| Model | Description |
|---|---|
| CISCO-STACK-T1-50CM | 50cm Data Stack Cable |
| CAB-CONSOLE-USB | Console Cable 6 ft with USB Type A and mini-B |
| C3KX-NM-1G | Catalyst 3K-X Network Module |
SM-D-ES2-48 Product Highlights
SM-D-ES2-48 Product Application Scenarios
- ● Layer 2 switching
- ● 48 Fast Ethernet ports
- ● For Cisco 2900/3900 series
- ● Enhanced EtherSwitch SM
- ● Scalable network solution
| Feature | SM-D-ES2-48 | HWIC-D-9ESW | HWIC-4ESW | NIM-16ES1G-P | NIM-24A | SM-X-ES3D-48 |
|---|---|---|---|---|---|---|
| Ports | 48 Fast Ethernet | 9 Fast Ethernet | 4 Fast Ethernet | 16 Gig Ethernet | 24 Asynchronous | 48 Gig Ethernet |
| Switching Layer | Layer 2 | Layer 2 | Layer 2 | Layer 2 & 3 | Layer 1 | Layer 3 |
| Router Compatibility | 2900/3900 | 2800/3800 | 1800/2800 | 4000 | 4000 | ISR G2 |
| Module Type | Service Module | HWIC | HWIC | NIM | NIM | Service Module |
| Power Over Ethernet | No | No | No | Yes | No | Yes |
- ● Expanding enterprise networks
- ● Enhancing data center connectivity
- ● Building campus network infrastructure
| Accessory Model | Description |
|---|---|
| GLC-T | Cisco 1000BASE-T SFP Module |
| CAB-STACK-3M | Stacking cable for Catalyst switches |
| PWR-2900-AC | 2900 Series Power Supply |
Quick Specs
Figure 1 shows the appearance of ISM-SRE-300-K9. Table 1 shows the quick specs of ISM-SRE-300-K9.| Part Number | ISM-SRE-300-K9 |
| Form factor | ISM |
| CPU | Genuine Intel Processor, 1.06 GHz |
| DRAM | 512 MB |
| Compact Flash memory | 4-GB internal USB flash-memory module |
| Internal network interfaces | Gigabit Ethernet connectivity to router backplane |
| External network interfaces | None |
| Router platforms | Cisco 1941, 2901, 2911, 2921, 2951, 3925, and 3945 Integrated Services Routers |
Router Platforms
Table 2 shows the router platforms which support ISM-SRE-300-K9.| Model | Description |
| CISCO1941/K9 | Cisco 1941 Router w/2 GE,2 EHWIC slots,256MB CF,512MB DRAM,IP Base |
| CISCO2901/K9 | Cisco 2901 router w/2 GE,4 EHWIC,2 DSP,256MB CF,512MB DRAM,IP Base |
| CISCO2911/K9 | Cisco 2921 Router w/3 GE,4 EHWIC,3 DSP,1 SM,256MB CF,512MB DRAM,IPB |
| CISCO2921/K9 | Cisco 2911 router w/3 GE,4 EHWIC,2 DSP,1 SM,256MB CF,512MB DRAM,IPB |
| CISCO2951/K9 | Cisco 2951 Router w/3 GE,4 EHWIC,3 DSP,2 SM,256MB CF,512MB DRAM,IPB |
| CISCO3925/K9 | Cisco 3925 Router w/SPE100(3GE,4EHWIC,4DSP,2SM,256MBCF,1GBDRAM,IPB) |
| CISCO3945/K9 | Cisco 3945 Router w/SPE150(3GE,4EHWIC,4DSP,4SM,256MBCF,1GBDRAM,IPB) |
Compare to Similar Item
Table 3 shows the comparison between ISM-SRE-300-K9 and SM-SRE-700-K9.| Product part number | ISM-SRE-300-K9 | SM-SRE-700-K9 |
| Form factor | ISM | SM |
| CPU | Genuine Intel Processor, 1.06 GHz | Intel Core2 Solo, 1.86 GHz |
| DRAM | 512 MB | 4 GB |
| Compact Flash memory | 4-GB internal USB flash-memory module | 2-GB internal USB flash-memory module |
| Hard disk | None | One 500-GB SATA 5400 rpm (SRE 700) |
| Hot-swappable hard disk drive (HDD) | None | None |
NIM-SSD Product Highlights
NIM-SSD Product Application Scenarios
- ● High-speed data access
- ● Reliable storage expansion
- ● Compact design
- ● Easy integration
- ● Enhanced system performance
| Feature | Cisco NIM-SSD | Juniper NFX350-SCC | HP JG136A | Dell EMC NX3240 | Arista 7050X3 | Huawei EH1D2CS | Extreme Networks V-SP-L |
|---|---|---|---|---|---|---|---|
| Storage Capacity | Up to 1TB | 500GB | 1TB | 2TB | 1.2TB | 800GB | 1TB |
| Form Factor | NIM Carrier | Carrier Card | Module | Card | Module | Card | Card |
| Interface | SATA | SATA | SATA | SAS | SATA | SATA | SATA |
| Performance | High | Moderate | High | Very High | High | Moderate | High |
| Compatibility | Cisco ISR | Juniper Devices | HP ProCurve | Dell Server | Arista Net | Huawei Servers | Extreme Devices |
- ● Enterprise storage expansion
- ● Data-heavy applications
- ● Network optimization
| Model | Description |
|---|---|
| SSD-250GB-CISCO | 250GB SSD for NIM-SSD |
| NIM-SSD-CADDY | Mounting caddy for NIM-SSD |
| CAB-SATA-1M | 1-meter SATA cable |
Quick Spec
| Brand | Cisco |
| Model | PVDM4-256 |
| Channels | 256 |
| Type | DSP Module |
| Compatibility | Cisco ISR G2 router family |
Product Features
- ● ● High-density, high-performance DSP architecture
- ● ● Supports a mix of voice and video conferencing sessions
- ● ● Real-time adaptation with Cisco Flex DSP technology
- ● ● Energy efficient with dynamic power adjustment
- ● ● Seamless integration with existing Cisco ISR G2 routers
Product Applications
- ● ● Enterprise voice communication solutions
- ● ● High-quality video conferencing for remote work setups
- ● ● Unified communications for multi-branch deployments
Supported Options
| Accessory | Model |
| DSP Module Adapter | HSA-10 |
| Module Carrier Card | MCC-20 |
| Cooling Fan Assembly | CF-12 |
Compare to Similar Items
| Model | Difference |
| Cisco PVDM4-128 | 128-channel, lower capacity |
| Cisco PVDM4-64 | 64-channel, suitable for smaller deployments |
| Cisco PVDM4-1024 | 1024-channel, higher capacity for extensive workloads |
Quick Spec
| Brand | Cisco |
| Model | EHWIC-3G-HSPA+7-A |
| Network Type | 3G |
| Frequency Bands | 850, 900, 1900, 2100 MHz |
| Wireless Standard | GSM |
Product Features
- ● ● Supports GSM 850, 900, 1900, and 2100 MHz bands
- ● ● Enhanced High-Speed Packet Access (HSPA+)
- ● ● Built-in security features ensuring safe connectivity
- ● ● Seamless integration with existing Cisco infrastructure
- ● ● Flexible deployment options for various environments
Product Applications
- ● ● Ideal for remote office connectivity and workforce mobility
- ● ● Suitable for providing backup internet connectivity in primary network failure scenarios
- ● ● Effective in vehicular network setups, enabling robust on-the-go internet access
Supported Options
| Accessory Name | Model |
| GSM Antenna | ANT-3G-1 |
| Backup Battery | BBU-3G-2 |
| Extension Cable | CAB-3G-10M |
Compare to Similar Items
| Model | Differences |
| Cisco EHWIC-4G-LTE | Supports 4G LTE networks instead of 3G |
| Cisco HWIC-3G-GSM | Lower data speed, does not support HSPA+ |
| Cisco NIM-3G | Part of the Network Interface Module family with broader compatibility |
Quick Spec
| Brand | Cisco |
| Model | EHWIC-3G-HSPA+7 |
| Network Type | 3G |
| Frequency Bands | 850, 900, 1900, 2100 MHz |
| Wireless Standard | HSPA+ |
Product Features
- ● ● High-speed 3G HSPA+ connectivity
- ● ● Compatible with GSM 850, 900, 1900, and 2100 MHz bands
- ● ● Supports secure and reliable wireless communication
- ● ● Seamless integration with Cisco routers
- ● ● Compact design for easy deployment
Product Applications
- ● ● Remote office connectivity for continuous internet access
- ● ● Mobile workforce requiring reliable and fast data access
- ● ● Disaster recovery sites where wired connections are impractical
Supported Options
| Antenna | Cisco Multi-band Swivel-mount Dipole Antenna |
| Cable | Cisco 10-ft Crossover Cable |
| Power Supply | Cisco 12V Power Adaptor |
Compare to Similar Items
| Model | Differences |
| Cisco EHWIC-3G-HSPA+8 | Supports additional frequency bands |
| Cisco EHWIC-4G-LTE-G | Provides 4G LTE connectivity |
| Cisco PVDM3-16 | Used for digital signal processing with different functionalities |
Quick Spec
| Brand | Cisco |
| Model | EHWIC-4G-LTE-V |
| Network Compatibility | US-Verizon Wireless Network |
| LTE Band | 13 (700 MHz) |
| Connectivity | 4G |
Product Features
- ● ● Supports 4G LTE connectivity for high-speed internet access.
- ● ● Compatible with the US-Verizon wireless network.
- ● ● Operates on LTE band 13 (700 MHz) for optimal performance.
- ● ● Integrated with Cisco IOS Software for seamless networking.
- ● ● Enhanced security features for protected internet connections.
Product Applications
- ● ● Remote office locations requiring reliable internet connectivity.
- ● ● Backup WAN connectivity to ensure business continuity during wired link failures.
- ● ● Mobile operations, such as temporary work sites and emergency response units, needing robust internet access.
Supported Options
| Accessory | Model |
| 4G LTE Antenna | CAB-LTE-A2-R |
| Power Supply | PWR-IE50W-AC-DC |
| Mounting Kit | ACS-4350-RM-19 |
Compare to Similar Items
| Model | Differences |
| Cisco EHWIC-4G-LTE-A | Supports AT&T network, LTE band 4 (AWS) and 17 (700 MHz) |
| Cisco EHWIC-4G-LTE-G | Supports global LTE networks, multi-band support |
| Cisco EHWIC-3G-HSPA+ | Supports 3G HSPA+, operating on different frequency bands |
Quick Spec
| Brand | Cisco |
| Model Name | EHWIC-4G-LTE-A |
| Network Support | US-AT&T Wireless |
| LTE Band | Band 17 (700 MHz) & Band 4 |
| Connectivity | 4G |
Product Features
- ● ● Reliable 4G LTE connectivity for robust network performance.
- ● ● Supports AT&T Wireless networks for optimal compatibility in the US.
- ● ● Flexible deployment options for various enterprise needs.
- ● ● High-speed mobile data capabilities for enhanced productivity.
- ● ● Compact design ensuring ease of integration with existing infrastructure.
Product Applications
- ● ● Deploy in remote locations where wired internet is unavailable.
- ● ● Utilize as a failover solution for critical business operations.
- ● ● Integrate into mobile workforce equipment to maintain connectivity on the go.
Supported Options
| Accessory | Model |
| External Antenna | CISCO-ANT-4G-DP |
| Extended Battery Pack | CISCO-BP-6EXT |
| Mounting Kit | CISCO-MNT-KIT |
Compare to Similar Items
| Feature | Cisco EHWIC-4G-LTE-A | Cisco EHWIC-4G-LTE-G | Cisco EHWIC-4G-LTE-V |
| Network Support | US-AT&T | Global | Verizon |
| LTE Bands | Band 17 & Band 4 | Band 3, 7, 20 | Band 13 |
| Carrier Compatibility | AT&T | Multiple Carriers | Verizon |
| Regions | US | Global | US |
| Primary Use | Enterprises | Global Deployments | Verizon Networks |