No products in the cart.
Showing 17–32 of 60 results
Quick Specs
Table 1 shows the Quick Specs.| Product Code | ISR4221X/K9 |
| Description | Cisco ISR 4221 (2GE,2NIM,8G FLASH,8G DRAM,IPB) |
| Dimensions | 1.72 x 12.7 x 10"(43.7 x 322.6 x 254 mm) |
| Aggregate Throughput (Default) | 35 Mbps |
| Aggregate Throughput (Performance License) | 75 Mbps |
| Aggregate CEF Only[5] Throughput (Boost License) | 1.2 Gbps |
Product Details
Figure 1 shows the LEDs on the front panel of the Cisco ISR4221/K9. There are 4 LEDs on the front panel. Figure 2 shows the back panel of Cisco ISR4221/K9. Note:|
① |
GE 0/0/0 RJ-45 (copper cable) port |
⑤ |
Console port |
|
② |
Power switch |
⑥ |
GE 0/0/1 (copper cable) port |
|
③ |
Power input connector |
⑦ |
GE 0/0/0 SFP (fiber-optic) port |
|
④ |
GE “MGMT” port (with USB port below) |
⑧ |
NIM slots |
The Modules, Cards, Licenses & Accessories
Cisco ISR4221X/K9 is one of the Cisco 4000 series routers, which support new modules & cards slots, such as NIM, ISC, etc. Besides, Cisco ISR4221X/K9 can upgrade by licenses. Table 2 shows some recommended modules, cards, licenses and accessories of Cisco ISR4221X/K9.|
Items |
Models |
Descriptions |
| Ethernet Switch | NIM-ES2-4= | Cisco 4-Port Gigabit Ethernet Switch NIM |
| NIM-ES2-8 | Cisco 8-Port Gigabit Ethernet Switch NIM | |
| Ethernet Routed-Port | NIM-1GE-CU-SFP | 1-port Gigabit Ethernet NIM, dual mode SFP or RJ45 |
| NIM-2GE-CU-SFP | 2-port Gigabit Ethernet NIM, dual mode SFP or RJ45 | |
| Wireless WAN (3G, 4G, LTE) | NIM-4G-LTE-GA= | 4G LTE NIM for Global (Europe, Australia & New Zealand) |
| T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards | NIM-1MFT-T1/E1 | 1-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-2MFT-T1/E1 | 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module | |
| Serial WAN Interface | NIM-1T | 1-Port Serial High-Speed WAN Interface Card |
| NIM-2T | 2-Port Serial High-Speed WAN Interface Card | |
| Small Form-Factor Pluggable | GLC-EX-SMD | 1000BASE-EX SFP transceiver module, SMF, 1310nm, DOM |
| GLC-LH-SM | GE SFP, LC connector LX/LH transceiver | |
| GLC-LH-SMD | GE SFP, LC connector LX/LH transceiver; with DOM | |
| GLC-SX-MMD | GE SFP, LC connector SX transceiver; with DOM | |
| GLC-ZX-SMD | 1000BASE-ZX SFP; with DOM | |
|
Licenses |
L-SL-4220-APP-K9= |
AppX License for Cisco ISR 4220 Series |
Compare to Similar Items
Table 3 shows the comparison of Cisco Router ISR 4000 Series.|
Technical Specifications |
ISR4461/K9 |
ISR4451-X/K9 |
ISR4431/K9 |
ISR4351/K9 |
ISR4331/K9 |
ISR4321/K9 |
ISR4221X/K9 |
|
Aggregate Throughput |
1.5Gbps |
1 Gbps to 2 Gbps |
500 Mbps to 1 Gbps |
200 Mbps to 400 Mbps |
100 Mbps to 300 Mbps |
50 Mbps to 100 Mbps |
35 Mbps to 75 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
4 |
3 |
3 |
2 |
2 |
|
RJ-45-based ports |
4 |
4 |
4 |
3 |
2 |
2 |
2 |
|
SFP-based ports |
4 |
4 |
4 |
3 |
2 |
1 |
1 |
|
Enhanced service-module slots |
3 |
2 |
0 |
2 |
1 |
0 |
0 |
|
Doublewide service-module slots |
2 |
1 (assumes no singlewide SM-X modules installed) |
0 |
1 (assumes no singlewide SM-X modules installed) |
0 |
0 |
0 |
|
NIM slots |
3 |
3 |
3 |
3 |
2 |
2 |
2 |
|
OIR (all I/O modules) |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
No |
|
Onboard ISC slot |
1 |
1 |
1 |
1 |
1 |
1 |
No |
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
C1-CISCO4221/K9 |
|
Aggregate Throughput |
35 Mbps to 75 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
|
RJ-45-based ports |
2 |
|
SFP-based ports |
1 |
|
NIM (Network Interface Modules) slots |
2 |
|
Onboard ISC slot |
No |
|
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) |
4 GB |
|
Flash Memory |
8 GB |
|
Power-supply options |
External AC only |
|
Rack height |
1 RU |
|
Dimensions (H x W x D) |
1.72 x 12.7 x 10 in (43.7 x 322.6 x 254 mm) |
|
Weight with AC PS (no modules) |
7.1 lb (3.22 kg) |
Product Details
Figure 1 shows the LEDs on the front panel of the C1-CISCO4221/K9.
·There are 4 LEDs on the front panel.
Figure 2 shows the back panel of C1-CISCO4221/K9.
Note:
|
① |
GE 0/0/0 RJ-45 (copper cable) port |
⑤ |
Console port |
|
② |
Power switch |
⑥ |
GE 0/0/1 (copper cable) port |
|
③ |
Power input connector |
⑦ |
GE 0/0/0 SFP (fiber-optic) port |
|
④ |
GE “MGMT” port (with USB port below) |
⑧ |
NIM slots |
The Modules & Cards
Table 2 shows some recommended modules and cards.
|
Items |
Models |
Description |
|
Smart Serial Cables |
CAB-SS-449FC |
Cisco CAB-SS-449FC RS-449 Cable, DCE Female to Smart Serial, 10 Feet |
|
Console and Auxillary Cables |
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-ES2-4 |
Cisco 4000 Series Integrated Services Router 4-Port Gigabit Ethernet Switch Module layer 2? |
|
|
NIM-ES2-8 |
Cisco 4000 Series Integrated Services Router 8-Port Gigabit Ethernet Switch Module NIM |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
ISR4221-AX/K9 |
|
Aggregate Throughput |
35 Mbps to 75 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
|
RJ-45-based ports |
2 |
|
SFP-based ports |
1 |
|
NIM (Network Interface Modules) slots |
2 |
|
Onboard ISC slot |
No |
|
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) |
4 GB |
|
Flash Memory |
8 GB |
|
Power-supply options |
External AC only |
|
Rack height |
1 RU |
|
Dimensions (H x W x D) |
1.72 x 12.7 x 10 in (43.7 x 322.6 x 254 mm) |
|
Weight with AC PS (no modules) |
7.1 lb (3.22 kg) |
Product Details
Figure 1 shows the LEDs on the front panel of the Cisco ISR4221/K9 for reference. ISR4221-AX/K9 is similar with it.
·There are 4 LEDs on the front panel.
Figure 2 shows the back panel of Cisco ISR4221/K9 for reference. ISR4221-AX/K9 is similar with it..
Note:
|
① |
GE 0/0/0 RJ-45 (copper cable) port |
⑤ |
Console port |
|
② |
Power switch |
⑥ |
GE 0/0/1 (copper cable) port |
|
③ |
Power input connector |
⑦ |
GE 0/0/0 SFP (fiber-optic) port |
|
④ |
GE “MGMT” port (with USB port below) |
⑧ |
NIM slots |
The Modules & Cards
Table 2 shows some recommended modules and cards.
|
Items |
Models |
Description |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 | Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-ES2-4 |
Cisco 4000 Series Integrated Services Router 4-Port Gigabit Ethernet Switch Module layer 2 |
|
|
NIM-ES2-8 |
Cisco 4000 Series Integrated Services Router 8-Port Gigabit Ethernet Switch Module NIM |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Items
Table 3 shows the comparison.
|
Models |
ISR4221/K9 |
ISR4221-AX/K9 |
|
Description |
Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB) |
Cisco ISR 4221 AX Bundle w/APP, SEC lic |
|
Aggregate Throughput |
35 Mbps to 75 Mbps |
35 Mbps to 75 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
2 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
1 |
1 |
|
Enhanced service-module slots |
0 |
0 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
No |
No |
|
Rack height |
1 |
1 |
Quick Spec
Figure 1 shows the appearance of C1-CISCO4331/K9. Table 1 shows the quick spec.| Product Number | C1-CISCO4331/K9 |
| Product Description | Cisco ONE ISR 4331 (3GE.2NIM.1SM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
100 Mbps to 300 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
|
RJ-45-based ports |
2 |
|
SFP-based ports |
2 |
|
NIM slots |
2 |
|
OIR (all I/O modules) |
Yes |
|
Onboard ISC slot |
1 |
|
Default flash memory |
4 GB |
|
Maximum flash memory |
16 GB |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4331/K9 for reference. C1-CISCO4331/K9 is similar with it.Note:
|
① |
USB Type B mini port |
⑤ |
Management port |
|
② |
Serial console port |
⑥ |
LEDs |
|
③ |
USB Type A port |
⑦ |
AC Power |
|
④ |
AUX Port |
⑧ |
Power switch |
Figure 3 shows the back panel of Cisco ISR4331/K9 for reference. C1-CISCO4331/K9 is similar with it.
Note:
|
① |
RJ45 Ports |
③ |
NIM Slots |
|
② |
SFP Ports |
④ |
SM-X Slot |
· NIM slots support one double-wide or two signal-wide modules. · An SM-X slot can be converted into a Network Interface Module (NIM) slot using an optional carrier card.
The Modules, Cards, Licenses & Accessories
Table 2 shows some recommended modules, cards, licenses and several cables.| Items | Models | Descriptions |
| Smart Serial Cables | CAB-SS-449FC | Cisco CAB-SS-449FC RS-449 Cable, DCE Female to Smart Serial, 10 Feet |
| CAB-SS-V35FC | Cisco CAB-SS-V35FC V.35 Cable, DCE Female to Smart Serial, 10 Feet | |
| Console and Auxillary Cables | CAB-AUX-RJ45 | Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
| CAB-ETH-S-RJ45 | Cisco Router Cable CAB-ETH-S-RJ45 | |
| CAB-CONSOLE-RJ45 | Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F | |
| CAB-CONSOLE-USB | Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B | |
| Licenses | L-SL-4330-APP-K9= | Cisco AppX license L-SL-4330-APP-K9= with 750 conns/ISRWAAS or 1300 conns/vWAAS for ISR4331 |
| Network Interface Modules | NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module | |
| NIM-4E/M | Analog voice network interface card (ear and mouth) | |
| NIM-2FXS | Cisco Analog voice network interface card NIM-2FXS | |
| NIM-2FXS/4FXO | Cisco Analog voice network interface card NIM-2FXS/4FXO | |
| NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module | |
| SFPs for On-Board GE Ports | GLC-SX-MMD | Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
| GLC-LH-SMD | Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM | |
| GLC-ZX-SMD | Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 3 shows the comparison between C1-CISCO4331/K9 and C1-CISCO4321/K9.| Product Number | C1-CISCO4331/K9 | C1-CISCO4321/K9 |
| Product Description | Cisco ONE ISR 4331 (3GE.2NIM.1SM.4G FLASH.4G DRAM.IPB) | Cisco ONE ISR 4321 (2GE.2NIM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
100 Mbps to 300 Mbps |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
2 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
2 |
1 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
Quick Specs
Figure 1 shows the appearance of ISR4331-AXV/K9. Table 1 shows the Quick Specs.| Product Code | ISR4331-AXV/K9 |
| Aggregate Throughput | 100 Mbps to 300 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 3 |
| RJ-45-based ports | 2 |
| SFP-based ports | 2 |
| Enhanced service-module (SM-X) slot | 1 |
| NIM (Network Interface Modules) slots | 2 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 16 GB (maximum) |
| Flash Memory | 4 GB (default) / 16 GB (maximum) |
| Power-supply options | Internal: AC and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 44.45 x 438.15 x 438.15 mm |
Product Details
Figure 2 shows the front panel of ISR4331-AXV/K9. Note:| ① | USB Type B mini port | ⑤ | Management port |
| ② | Serial console port | ⑥ | LEDs |
| ③ | USB Type A port | ⑦ | AC Power |
| ④ | AUX Port | ⑧ | Power switch |
| LEDs | Represents | Color | Description |
| POE0 | POE PSU | Green | PoE is on and providing power. |
| Amber | PoE is in a failed condition. | ||
| Off | PoE supply is not present. | ||
| FLASH | System Flash Status | Blinking Green | Compact flash/eUSB flash is present and currently being accessed. |
| TEMP | Temperature Status | Solid green | All temperature sensors in the system are within acceptable range. |
| Amber | One or more temperature sensors in the system are outside the acceptable range. | ||
| Off | Temperature is not being monitored. | ||
| PWR | System Power | Green | System power is on and functioning correctly. |
| Green blinking | System power is in the process of shutting down. | ||
| Amber | System power is up, but low level initialization failed. | ||
| Amber blinking | System power is up, but the system failed to come out of reset. | ||
| Off | System power is off. | ||
| SSD | mSATA Slot Status | Green | SSD mSATA is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| ISC | ISC Slot Status | Green | PVDM4 is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| FAN | Fan Status | Green | All fans are operating. |
| Amber | One fan has stopped working. | ||
| Blinking Amber | Two or more fans have stopped working, or the fan tray has been removed. | ||
| Off | Fans are not being monitored. | ||
| STAT | System Status | Solid green | System operating normally. |
| Blinking amber | BIOS/Rommon is booting. | ||
| Amber | BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. | ||
| Off | System is not out of reset or BIOS image is not loadable. |
| ① | RJ45 Ports | ③ | NIM Slots |
| ② | SFP Ports | ④ | SM-X Slot |
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and accessories.|
Items |
Models |
Descriptions |
|
Console and Auxillary Cables |
CAB-AUX-RJ45 |
Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
|
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Licenses |
L-SL-4330-APP-K9= |
Cisco AppX license L-SL-4330-APP-K9= with 750 conns/ISRWAAS or 1300 conns/vWAAS for ISR4331 |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
NIM-8MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 4 shows the comparison.|
Technical Specifications |
ISR4331/K9 |
ISR4331-AXV/K9 |
|
Description |
Cisco 4000 Router, 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC | Cisco ISR 4331 AXV Bundle with PVDM4-32, CUBE-10, IPBase, APP, SEC and UC licenses. |
|
Aggregate Throughput |
100 Mbps to 300 Mbps |
? |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
? |
|
RJ-45-based ports |
2 |
? |
|
SFP-based ports |
2 |
? |
|
Enhanced service-module slots |
1 |
? |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4331/K9 for reference. ISR4331-VSEC/K9 is similar with it. Table 1 shows the Quick Specs.| Product Code | ISR4331-VSEC/K9 |
| Aggregate Throughput | 100 Mbps to 300 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 3 |
| RJ-45-based ports | 2 |
| SFP-based ports | 2 |
| Enhanced service-module (SM-X) slot | 1 |
| NIM (Network Interface Modules) slots | 2 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 16 GB (maximum) |
| Flash Memory | 4 GB (default) / 16 GB (maximum) |
| Power-supply options | Internal: AC and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 44.45 x 438.15 x 438.15 mm |
| Package Weight | 12.96 Kg |
Product Details
Figure 2 shows the front panel of Cisco ISR4331/K9 for reference. ISR4331-VSEC/K9 is similar with it.. Note:| ① | USB Type B mini port | ⑤ | Management port |
| ② | Serial console port | ⑥ | LEDs |
| ③ | USB Type A port | ⑦ | AC Power |
| ④ | AUX Port | ⑧ | Power switch |
Table 2. Voice Security Bundle Features Table.
|
Authentication and Encryption Features |
• Media encryption of voice RTP streams using SRTP • Exchange of RTP Control Protocol (RTCP) information using secure RTCP • SRTP to RTP fallback for calls between secure and insecure endpoints • Secure calls supported in Cisco Unified Survivable Remote Site Telephony (SRST) mode during WAN failover • Compressed RTP (CRTP) supported with media encrypted calls using SRTP |
|
Authentication and Encryption Algorithm |
• Supports AES-128 encryption algorithm • Supports the HMAC secure hash authentication algorithm (SHA 1) |
|
Signaling Authentication and Encryption Features |
• Gateway to Cisco Unified Communications Manager signaling and encryption uses IPSec for Media Gateway Control Protocol (MGCP), H.323 and SIP gateways • IP phone to Cisco Unified Survivable Remote Site Telephony router signaling and encryption uses TLS (Transport Layer Security) |
|
Protocol Support |
• MGCP 0.1 (supports MGCP gateways with Cisco Unified Communications Manager) • H.323 (supported on H.323 gateways and CUBE; Cisco Unified Communications Manager interoperability is optional) • Session Initiation Protocol (SIP) • SCCP (Cisco Unified IP Phone) in SRST mode |
|
Module Support |
• Any module that has PVDM2, PVDM3 and/or built-in DSP |
|
Codec Support |
• G.711, G.729A, and G.729 |
| ① | RJ45 Ports | ③ | NIM Slots |
| ② | SFP Ports | ④ | SM-X Slot |
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and accessories of Cisco ISR4331-VSEC/K9.|
Items |
Models |
Descriptions |
|
Console and Auxillary Cables |
CAB-AUX-RJ45 |
Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
|
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Licenses |
L-SL-4330-APP-K9= |
Cisco AppX license L-SL-4330-APP-K9= with 750 conns/ISRWAAS or 1300 conns/vWAAS for ISR4331 |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
NIM-8MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 4 shows the comparison chart.|
Models |
ISR4331-VSEC/K9 |
ISR4331/K9 |
|
Description |
Cisco ISR 4331 Bundle with UC & Sec Lic. PVDM4-32. CUBE-10 |
Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) |
|
Aggregate Throughput |
100 Mbps to 300 Mbps |
100 Mbps to 300 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
3 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
2 |
2 |
|
Enhanced service-module slots |
1 |
1 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
|
Rack height |
1 |
1 |
Quick Spec
Figure 1 shows the appearance of C1-CISCO4321/K9. Table 1 shows the quick spec.| Product Number | C1-CISCO4321/K9 |
| Product Description | Cisco ONE ISR 4321 (2GE.2NIM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
|
RJ-45-based ports |
2 |
|
SFP-based ports |
1 |
|
NIM slots |
2 |
|
OIR (all I/O modules) |
Yes |
|
Onboard ISC slot |
1 |
|
Default flash memory |
4 GB |
|
Maximum flash memory |
8 GB |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4321/K9 for reference. C1-CISCO4321/K9 is similar with it.There are eight LEDs on the front panel.
Table 2 shows the description of these LEDs.
|
LEDs |
Represents |
Color |
Description |
|
POE0 |
POE PSU |
Green |
PoE is on and providing power. |
|
Amber |
PoE is in a failed condition. |
||
|
Off |
PoE supply is not present. |
||
|
FLASH |
System Flash Status |
Blinking Green |
Compact flash/eUSB flash is present and currently being accessed. |
|
TEMP |
Temperature Status |
Solid green |
All temperature sensors in the system are within acceptable range. |
|
Amber |
One or more temperature sensors in the system are outside the acceptable range. |
||
|
Off |
Temperature is not being monitored. |
||
|
PWR |
System Power |
Green |
System power is on and functioning correctly. |
|
Green blinking |
System power is in the process of shutting down. |
||
|
Amber |
System power is up, but low level initialization failed. |
||
|
Amber blinking |
System power is up, but the system failed to come out of reset. |
||
|
Off |
System power is off. |
||
|
SSD |
mSATA Slot Status |
Green |
SSD mSATA is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
ISC |
ISC Slot Status |
Green |
PVDM4 is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
FAN |
Fan Status |
Green |
All fans are operating. |
|
Amber |
One fan has stopped working. |
||
|
Blinking Amber |
Two or more fans have stopped working, or the fan tray has been removed. |
||
|
Off |
Fans are not being monitored. |
||
|
STAT |
System Status |
Solid green |
System operating normally. |
|
Blinking amber |
BIOS/Rommon is booting. |
||
|
Amber |
BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. |
||
|
Off |
System is not out of reset or BIOS image is not loadable. |
Figure 3 shows the back panel of Cisco ISR4321/K9 for reference. C1-CISCO4321/K9 is similar with it.
Note:
|
① |
Grounding |
⑦ |
GE 0/0/1 (copper cable) port |
|
② |
Power switch |
⑧ |
GE 0/0/0 SFP (fiber-optic) port |
|
③ |
Power input connector |
⑨ |
NIM slots |
|
④ |
GE “MGMT” port (with USB port below) |
⑩ |
GE 0/0/0 RJ-45 (copper cable) port |
|
⑤ |
USB Type B mini port |
⑪ |
Auxiliary port |
|
⑥ |
Console port |
||
·The NIMs support 2 single-wide or 1 double-wide.
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Description |
|
License |
L-SL-4320-APP-K9= |
Cisco AppX license L-SL-4320-APP-K9= with 200 conns/ISRWAAS or 750 conns/vWAAS |
|
Smart Serial Cables |
CAB-SS-449FC |
Cisco CAB-SS-449FC RS-449 Cable, DCE Female to Smart Serial, 10 Feet |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Network Interface Modules |
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Items
Table 4 shows the comparison between C1-CISCO4321/K9 and C1-CISCO4331/K9.| Product Number | C1-CISCO4321/K9 | C1-CISCO4331/K9 |
| Product Description | Cisco ONE ISR 4321 (2GE.2NIM.4G FLASH.4G DRAM.IPB) | Cisco ONE ISR 4331 (3GE.2NIM.1SM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
100 Mbps to 300 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
3 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
1 |
2 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4321/K9 for reference. ISR4321-AX/K9 is similar with it. Table 1 shows the Quick Specs.| Product Code | ISR4321-AX/K9 |
| Aggregate Throughput | 50 Mbps to 100 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 2 |
| RJ-45-based ports | 2 |
| SFP-based ports | 1 |
| NIM (Network Interface Modules) slots | 2 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 8 GB (maximum) |
| Flash Memory | 4 GB (default) / 8 GB (maximum) |
| Power-supply options | External: AC and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 44.55 x 369.57 x 294.64 mm |
| Package Weight | 9.19 Kg |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4321/K9 for reference. ISR4321-AX/K9 is similar with it.. ·There are eight LEDs on the front panel. Table 2 shows the description of these LEDs.| LEDs | Represents | Color | Description |
| POE0 | POE PSU | Green | PoE is on and providing power. |
| Amber | PoE is in a failed condition. | ||
| Off | PoE supply is not present. | ||
| FLASH | System Flash Status | Blinking Green | Compact flash/eUSB flash is present and currently being accessed. |
| TEMP | Temperature Status | Solid green | All temperature sensors in the system are within acceptable range. |
| Amber | One or more temperature sensors in the system are outside the acceptable range. | ||
| Off | Temperature is not being monitored. | ||
| PWR | System Power | Green | System power is on and functioning correctly. |
| Green blinking | System power is in the process of shutting down. | ||
| Amber | System power is up, but low level initialization failed. | ||
| Amber blinking | System power is up, but the system failed to come out of reset. | ||
| Off | System power is off. | ||
| SSD | mSATA Slot Status | Green | SSD mSATA is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| ISC | ISC Slot Status | Green | PVDM4 is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| FAN | Fan Status | Green | All fans are operating. |
| Amber | One fan has stopped working. | ||
| Blinking Amber | Two or more fans have stopped working, or the fan tray has been removed. | ||
| Off | Fans are not being monitored. | ||
| STAT | System Status | Solid green | System operating normally. |
| Blinking amber | BIOS/Rommon is booting. | ||
| Amber | BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. | ||
| Off | System is not out of reset or BIOS image is not loadable. |
| ① | Grounding | ⑦ | GE 0/0/1 (copper cable) port |
| ② | Power switch | ⑧ | GE 0/0/0 SFP (fiber-optic) port |
| ③ | Power input connector | ⑨ | NIM slots |
| ④ | GE “MGMT” port (with USB port below) | ⑩ | GE 0/0/0 RJ-45 (copper cable) port |
| ⑤ | USB Type B mini port | Auxiliary port | |
| ⑥ | Console port | ||
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Description |
|
License |
L-SL-4320-APP-K9= |
Cisco AppX license L-SL-4320-APP-K9= with 200 conns/ISRWAAS or 750 conns/vWAAS |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Network Interface Modules |
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Items
|
Models |
ISR4321-AX/K9 |
ISR4321/K9 |
|
Description |
Cisco ISR4321-AX/K9 (2GE,2NIM,4G FLASH,4G DRAM,IP Base, Security, AppX) |
Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
2 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
1 |
1 |
|
Enhanced service-module slots |
0 |
0 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
|
Rack height |
1 |
1 |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4321/K9 for reference. ISR4321-V/K9 is similar with it. Table 1 shows the Quick Specs.| Product Code | Cisco ISR4321-V/K9 |
| Aggregate Throughput | 50 Mbps to 100 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 2 |
| RJ-45-based ports | 2 |
| SFP-based ports | 1 |
| NIM (Network Interface Modules) slots | 2 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 8 GB (maximum) |
| Flash Memory | 4 GB (default) / 8 GB (maximum) |
| Power-supply options | External: AC and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 44.55 x 369.57 x 294.64 mm |
| Package Weight | 9.19 Kg |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4321/K9 for reference. ISR4321-V/K9 is similar with it.. ·There are eight LEDs on the front panel. Table 2 shows the description of these LEDs.| LEDs | Represents | Color | Description |
| POE0 | POE PSU | Green | PoE is on and providing power. |
| Amber | PoE is in a failed condition. | ||
| Off | PoE supply is not present. | ||
| FLASH | System Flash Status | Blinking Green | Compact flash/eUSB flash is present and currently being accessed. |
| TEMP | Temperature Status | Solid green | All temperature sensors in the system are within acceptable range. |
| Amber | One or more temperature sensors in the system are outside the acceptable range. | ||
| Off | Temperature is not being monitored. | ||
| PWR | System Power | Green | System power is on and functioning correctly. |
| Green blinking | System power is in the process of shutting down. | ||
| Amber | System power is up, but low level initialization failed. | ||
| Amber blinking | System power is up, but the system failed to come out of reset. | ||
| Off | System power is off. | ||
| SSD | mSATA Slot Status | Green | SSD mSATA is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| ISC | ISC Slot Status | Green | PVDM4 is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| FAN | Fan Status | Green | All fans are operating. |
| Amber | One fan has stopped working. | ||
| Blinking Amber | Two or more fans have stopped working, or the fan tray has been removed. | ||
| Off | Fans are not being monitored. | ||
| STAT | System Status | Solid green | System operating normally. |
| Blinking amber | BIOS/Rommon is booting. | ||
| Amber | BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. | ||
| Off | System is not out of reset or BIOS image is not loadable. |
| ① | Grounding | ⑦ | GE 0/0/1 (copper cable) port |
| ② | Power switch | ⑧ | GE 0/0/0 SFP (fiber-optic) port |
| ③ | Power input connector | ⑨ | NIM slots |
| ④ | GE “MGMT” port (with USB port below) | ⑩ | GE 0/0/0 RJ-45 (copper cable) port |
| ⑤ | USB Type B mini port | Auxiliary port | |
| ⑥ | Console port | ||
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Description |
|
License |
L-SL-4320-APP-K9= |
Cisco AppX license L-SL-4320-APP-K9= with 200 conns/ISRWAAS or 750 conns/vWAAS |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Network Interface Modules |
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Items
Table 4 shows the comparison chart.|
Models |
ISR4321-V/K9 |
ISR4321/K9 |
|
Description |
Cisco ISR4321-V/K9 (2GE,2NIM,4G FLASH,4G DRAM,Voice Bundle) |
Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
2 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
1 |
1 |
|
Enhanced service-module slots |
0 |
0 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
|
Rack height |
1 |
1 |
Quick Spec
Figure 1 shows the appearance of ISR4321-AXV/K9. Table 1 shows the quick spec.| Product Number | ISR4321-AXV/K9 |
| Product Description | Cisco ISR 4321 AXV Bundle, with CUBE-10, IPBase, APP, SEC and UC licenses. |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
|
RJ-45-based ports |
2 |
|
SFP-based ports |
1 |
|
NIM slots |
2 |
|
OIR (all I/O modules) |
Yes |
|
Onboard ISC slot |
1 |
|
Default flash memory |
4 GB |
|
Maximum flash memory |
8 GB |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4321/K9 for reference. ISR4321-AXV/K9 is similar with it.There are eight LEDs on the front panel.
Table 2 shows the description of these LEDs.
|
LEDs |
Represents |
Color |
Description |
|
POE0 |
POE PSU |
Green |
PoE is on and providing power. |
|
Amber |
PoE is in a failed condition. |
||
|
Off |
PoE supply is not present. |
||
|
FLASH |
System Flash Status |
Blinking Green |
Compact flash/eUSB flash is present and currently being accessed. |
|
TEMP |
Temperature Status |
Solid green |
All temperature sensors in the system are within acceptable range. |
|
Amber |
One or more temperature sensors in the system are outside the acceptable range. |
||
|
Off |
Temperature is not being monitored. |
||
|
PWR |
System Power |
Green |
System power is on and functioning correctly. |
|
Green blinking |
System power is in the process of shutting down. |
||
|
Amber |
System power is up, but low level initialization failed. |
||
|
Amber blinking |
System power is up, but the system failed to come out of reset. |
||
|
Off |
System power is off. |
||
|
SSD |
mSATA Slot Status |
Green |
SSD mSATA is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
ISC |
ISC Slot Status |
Green |
PVDM4 is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
FAN |
Fan Status |
Green |
All fans are operating. |
|
Amber |
One fan has stopped working. |
||
|
Blinking Amber |
Two or more fans have stopped working, or the fan tray has been removed. |
||
|
Off |
Fans are not being monitored. |
||
|
STAT |
System Status |
Solid green |
System operating normally. |
|
Blinking amber |
BIOS/Rommon is booting. |
||
|
Amber |
BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. |
||
|
Off |
System is not out of reset or BIOS image is not loadable. |
Figure 3 shows the back panel of Cisco ISR4321/K9?for reference. ISR4321-AXV/K9 is similar with it.
Note:
|
① |
Grounding |
⑦ |
GE 0/0/1 (copper cable) port |
|
② |
Power switch |
⑧ |
GE 0/0/0 SFP (fiber-optic) port |
|
③ |
Power input connector |
⑨ |
NIM slots |
|
④ |
GE “MGMT” port (with USB port below) |
⑩ |
GE 0/0/0 RJ-45 (copper cable) port |
|
⑤ |
USB Type B mini port |
? |
Auxiliary port |
|
⑥ |
Console port |
? | |
·The NIMs support 2 single-wide or 1 double-wide.
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Description |
|
License |
L-SL-4320-APP-K9= |
Cisco AppX license L-SL-4320-APP-K9= with 200 conns/ISRWAAS or 750 conns/vWAAS |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Network Interface Modules |
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Items
Table 4?shows the comparison between ISR4321-AXV/K9?and ISR4331-AXV/K9.| Product Number | ISR4321-AXV/K9 | ISR4331-AXV/K9 |
| Product Description | Cisco ISR 4321 AXV Bundle, with CUBE-10, IPBase, APP, SEC and UC licenses. | Cisco ISR 4331 AXV Bundle with PVDM4-32, CUBE-10, IPBase, APP, SEC and UC licenses. |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
100 Mbps to 300 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
3 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
1 |
2 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4321/K9 for reference. ISR4321-VSEC/K9 is similar with it. Table 1 shows the Quick Specs.| Product Code | ISR4321-VSEC/K9 |
| Aggregate Throughput | 50 Mbps to 100 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 2 |
| RJ-45-based ports | 2 |
| SFP-based ports | 1 |
| NIM (Network Interface Modules) slots | 2 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 8 GB (maximum) |
| Flash Memory | 4 GB (default) / 8 GB (maximum) |
| Power-supply options | External: AC and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 44.55 x 369.57 x 294.64 mm |
| Package Weight | 9.19 Kg |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4321/K9 for reference. ISR4321-VSEC/K9 is similar with it.. ·There are eight LEDs on the front panel. Figure 3 shows the back panel of Cisco ISR4321/K9 for reference. ISR4321-VSEC/K9 is similar with it.. Note:| ① | Grounding | ⑦ | GE 0/0/1 (copper cable) port |
| ② | Power switch | ⑧ | GE 0/0/0 SFP (fiber-optic) port |
| ③ | Power input connector | ⑨ | NIM slots |
| ④ | GE “MGMT” port (with USB port below) | ⑩ | GE 0/0/0 RJ-45 (copper cable) port |
| ⑤ | USB Type B mini port | ⑪ | Auxiliary port |
| ⑥ | Console port | ||
| Authentication and Encryption Features | • Media encryption of voice RTP streams using SRTP • Exchange of RTP Control Protocol (RTCP) information using secure RTCP • SRTP to RTP fallback for calls between secure and insecure endpoints • Secure calls supported in Cisco Unified Survivable Remote Site Telephony (SRST) mode during WAN failover • Compressed RTP (CRTP) supported with media encrypted calls using SRTP |
| Authentication and Encryption Algorithm | • Supports AES-128 encryption algorithm • Supports the HMAC secure hash authentication algorithm (SHA 1) |
| Signaling Authentication and Encryption Features | • Gateway to Cisco Unified Communications Manager signaling and encryption uses IPSec for Media Gateway Control Protocol (MGCP), H.323 and SIP gateways • IP phone to Cisco Unified Survivable Remote Site Telephony router signaling and encryption uses TLS (Transport Layer Security) |
| Protocol Support | • MGCP 0.1 (supports MGCP gateways with Cisco Unified Communications Manager) • H.323 (supported on H.323 gateways and CUBE; Cisco Unified Communications Manager interoperability is optional) • Session Initiation Protocol (SIP) • SCCP (Cisco Unified IP Phone) in SRST mode |
| Module Support | • Any module that has PVDM2, PVDM3 and/or built-in DSP |
| Codec Support | • G.711, G.729A, and G.729 |
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Description |
|
License |
L-SL-4320-APP-K9= |
Cisco AppX license L-SL-4320-APP-K9= with 200 conns/ISRWAAS or 750 conns/vWAAS |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Network Interface Modules |
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Items
Table 4 shows the comparison chart.|
Models |
ISR4321-VSEC/K9 |
ISR4321/K9 |
|
Description |
Cisco ISR 4321 Bundle w/UC & SEC License. CUBE-10 |
Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) |
|
Aggregate Throughput |
50 Mbps to 100 Mbps |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
2 |
2 |
|
RJ-45-based ports |
2 |
2 |
|
SFP-based ports |
1 |
1 |
|
Enhanced service-module slots |
0 |
0 |
|
NIM slots |
2 |
2 |
|
Onboard ISC slot |
1 |
1 |
|
Rack height |
1 |
1 |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4321-SEC/K9. Table 1 shows the Quick Specs.| Product Code | Cisco ISR4321-SEC/K9 |
| Bundle | Security Bundle |
| Aggregate Throughput | 50 Mbps to 100 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 2 |
| RJ-45-based ports | 2 |
| SFP-based ports | 1 |
| NIM (Network Interface Modules) slots | 2 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 8 GB (maximum) |
| Flash Memory | 4 GB (default) / 8 GB (maximum) |
| Power-supply options | External: AC and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 44.55 mm x 369.57 mm x 294.64 mm |
| Package Weight | 9.19 Kg |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4321-SEC/K9. · There are eight LEDs on the front panel: POE0, FLASH, TEMP, PWR, SSD, ISC, FAN, and STAT. Figure 3 shows the back panel of Cisco ISR4321-SEC/K9. Note:| ① | Grounding | ⑦ | GE 0/0/1 (copper cable) port |
| ② | Power switch | ⑧ | GE 0/0/0 SFP (fiber-optic) port |
| ③ | Power input connector | ⑨ | NIM slots |
| ④ | GE “MGMT” port (with USB port below) | ⑩ | GE 0/0/0 RJ-45 (copper cable) port |
| ⑤ | USB Type B mini port | Auxiliary port | |
| ⑥ | Console port |
The Modules, Cards and Accessories
Table 2 shows some recommended modules, cards, and cables.|
Items |
Models |
Description |
|
Console and Auxillary Cables |
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Network Interface Modules |
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
SFPs for On-Board GE Ports |
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
|
|
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
Compare to Similar Item
| Models | ISR4321/K9 | ISR4321-SEC/K9 |
| Bundle | None | Security Bundle |
| Aggregate Throughput | 50 Mbps to 100 Mbps | 50 Mbps to 100 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 2 | 2 |
| RJ-45-based ports | 2 | 2 |
| SFP-based ports | 1 | 1 |
| Enhanced service-module slots | 0 | 0 |
| NIM slots | 2 | 2 |
| Onboard ISC slot | 1 | 1 |
| Rack height | 1 | 1 |
ISR4321-DNA Product Highlights
ISR4321-DNA Product Application Scenarios
- ● 2 Gigabit Ethernet Ports
- ● 2 Network Interface Module Slots
- ● 4GB Flash Memory
- ● 4GB DRAM Memory
- ● Integrated Services
| Model | ISR4321-DNA | ISR4331/K9 | ISR4351/K9 | ISR4221/K9 | ISR4431/K9 | ISR4451-X/K9 | ISR4461/K9 |
|---|---|---|---|---|---|---|---|
| Gigabit Ethernet Ports | 2 | 3 | 3 | 2 | 4 | 4 | 6 |
| NIM Slots | 2 | 2 | 2 | 1 | 3 | 4 | 4 |
| Flash Memory | 4GB | 4GB | 4GB | 4GB | 4GB | 4GB | 8GB |
| DRAM Memory | 4GB | 4GB | 4GB | 2GB | 4GB | 8GB | 16GB |
| DNA License | Yes | Optional | Optional | No | Optional | Optional | Optional |
| Integrated Services | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
- ● Branch office connectivity
- ● Remote site deployments
- ● Secure enterprise networking
| Accessory Model | Description |
|---|---|
| NIM-2GE-CU-SFP | 2-port GE/SFP Network Interface Module |
| NIM-4G-LTE-NA | 4G LTE Network Interface Module |
| PWR-4320-AC | AC Power Supply for ISR4321 |
Quick Spec
Figure 1 shows the appearance of C1-CISCO4431/K9. Table 1 shows the quick spec.| Product Number | C1-CISCO4431/K9 |
| Product Description | Cisco ONE ISR 4431 (4GE.3NIM.8G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
500Mbps to 1Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
|
RJ-45-based ports |
4 |
|
SFP-based ports |
4 |
|
NIM slots |
3 |
|
OIR (all I/O modules) |
Yes |
|
Onboard ISC slot |
1 |
|
Default flash memory |
8 GB |
|
Maximum flash memory |
32 GB |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4431/K9 for reference. C1-CISCO4431/K9 is similar with it.Note:
|
① |
Power supply unit |
③ |
Router power On/Off switch |
|
② |
LEDs |
④ |
Optional power supply unit |
·LEDs include 12 indicators.
Table 2 shows the LED descriptions.
|
LEDs |
Represents |
Color |
Description |
|
PSU |
Power Supply Unit (P0 and P1) Status |
Green |
PSU is on and is providing power. |
|
Amber |
PSU is on but with errors or in a failure condition. |
||
|
Off |
Power supply is turned off. |
||
|
GE POE |
Internal PoE Daughter Card Status |
Green |
PSU is installed and providing power |
|
Amber |
PSU is installed but in a failure condition. |
||
|
Off |
PSU is off. |
||
|
FLASH |
System Flash Status |
Blinking Green |
Compact flash/eUSB flash is present and currently being accessed. |
|
TEMP |
Temperature Status |
Solid green |
All temperature sensors in the system are within acceptable range. |
|
Amber |
One or more temperature sensors in the system are outside the acceptable range. |
||
|
Off |
Temperature is not being monitored. |
||
|
PWR |
System Power |
Green |
System power is on and functioning correctly. |
|
Green blinking |
System power is in the process of shutting down. |
||
|
Amber |
System power is up, but low level initialization failed. |
||
|
Amber blinking |
System power is up, but the system failed to come out of reset. |
||
|
Off |
System power is off. |
||
|
POE BOOST |
Power Over Ethernet Boost Mode |
Green |
Two PoE power supplies are installed and operating in boost mode. |
|
Off |
This can mean one of the following: ·No PoE PSU installed. ·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode. |
||
|
ISC |
ISC Slot Status |
Green |
PVDM4 is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
FAN |
Fan Status |
Green |
All fans are operating. |
|
Amber |
One fan has stopped working. |
||
|
Blinking Amber |
Two or more fans have stopped working, or the fan tray has been removed. |
||
|
Off |
Fans are not being monitored. |
||
|
STAT |
System Status |
Solid green |
System operating normally. |
|
Blinking amber |
BIOS/Rommon is booting. |
||
|
Amber |
BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. |
||
|
Off |
System is not out of reset or BIOS image is not loadable. |
Figure 3 shows the back panel of Cisco ISR4431/K9 for reference. C1-CISCO4431/K9 is similar with it.
Note:
|
① |
GE management port |
⑤ |
Console port |
|
② |
Auxiliary port |
⑥ |
GE Ports |
|
③ |
USB Type A port |
⑦ |
NIM Slots |
|
④ |
USB Type B mini port |
||
·The NIMs support 2 single-wide or 1 double-wide.
·The GE Ports include 4 RJ45 ports and 4 SFP ports.
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Descriptions |
|
Smart Serial Cables |
CAB-SS-449FC |
Cisco CAB-SS-449FC RS-449 Cable, DCE Female to Smart Serial, 10 Feet |
|
CAB-SS-V35FC |
Cisco CAB-SS-V35FC V.35 Cable, DCE Female to Smart Serial, 10 Feet |
|
|
Console and Auxillary Cables |
CAB-AUX-RJ45 |
Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
|
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Licenses |
L-SL-44-APP-K9= |
Cisco ISR 4431/4451 AppX license L-SL-44-APP-K9= with WAAS/vWAAS 1300/2500 conns RTU |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
NIM-8MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 4 shows the comparison between C1-CISCO4431/K9 and C1-CISCO4321/K9.| Product Number | C1-CISCO4431/K9 | C1-CISCO4321/K9 |
| Product Description | Cisco ONE ISR 4431 (4GE.3NIM.8G FLASH.4G DRAM.IPB) | Cisco ONE ISR 4321 (2GE.2NIM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
500Mbps to 1Gbps |
50 Mbps to 100 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
2 |
|
RJ-45-based ports |
4 |
2 |
|
SFP-based ports |
4 |
1 |
|
NIM slots |
3 |
2 |
|
Onboard ISC slot |
1 |
1 |
Cisco ISR4431/K9++ Product Highlights
- ● High performance routing
- ● Integrated security features
- ● Fast deployment
- ● Advanced network management
- ● Scalable architecture
Product Features Comparison
| Model | Cisco ISR4431/K9++ | Cisco ISR4321 | Cisco ISR4351 | Juniper SRX320 | Fortinet FG-60F | Huawei AR2240 | HP MSR954 |
|---|---|---|---|---|---|---|---|
| Performance | 3 Gbps | 1 Gbps | 5 Gbps | 620 Mbps | 700 Mbps | 2 Gbps | 1 Gbps |
| Security | Integrated | Integrated | Integrated | Integrated | Integrated | Optional | Optional |
| Interfaces | 4 GE, 2 SFP | 2 GE, 1 SFP | 6 GE, 4 SFP | 4 GE | 4 GE | 4 GE, 2 SFP | 4 GE |
| WAN ports | 2 | 2 | 4 | 2 | 2 | 2 | 2 |
| Network Management | Advanced | Basic | Advanced | Basic | Basic | Advanced | Basic |
| Scalability | Highly scalable | Moderate | Highly scalable | Limited | Limited | Moderate | Limited |
| Power | Redundant | Single | Redundant | Single | Single | Redundant | Single |
Cisco ISR4431/K9++ Product Application Scenarios
- ● Medium-sized businesses
- ● Branch office deployments
- ● High-performance secure connections
Optional Add-ons
| Model | Description |
|---|---|
| ISR4431-Memory-4GB | 4GB Memory for ISR 4431 |
| ISR4431-NIM-2GE | NIM Module with 2 GE ports |
| PWR-4431-AC | AC Power Supply for ISR 4431 |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4431/K9 for reference. ISR4431-AX/K9 is similar with it. Table 1 shows the Quick Specs.| Product Code | ISR4431-AX/K9 |
| Aggregate Throughput | 500 Mbps to 1 Gbps |
| Total onboard WAN or LAN 10/100/1000 ports | 4 |
| RJ-45-based ports | 4 |
| SFP-based ports | 4 |
| Enhanced service-module (SM-X) slot | 0 |
| NIM (Network Interface Modules) slots | 3 |
| Onboard ISC slot | 1 |
| DDRM (data plane) | 2 GB (default) / 2 GB (maximum) |
| DDRM (control/services plane) | 4 GB (default) / 16 GB (maximum) |
| Flash Memory | 8 GB (default) / 32 GB (maximum) |
| Power-supply options | Internal: AC, DC, and PoE |
| Rack height | 1 RU |
| Dimensions (H x W x D) | 43.9 x 438.15 x 507.2 mm |
| Package Weight | 20.88 Kg |
Product Details
Figure 2 shows the front panel of Cisco ISR4431/K9 for reference. ISR4431-AX/K9 is similar with it. . Note:| ① | Power supply unit | ③ | Router power On/Off switch |
| ② | LEDs | ④ | Optional power supply unit |
| LEDs | Represents | Color | Description |
| PSU | Power Supply Unit (P0 and P1) Status | Green | PSU is on and is providing power. |
| Amber | PSU is on but with errors or in a failure condition. | ||
| Off | Power supply is turned off. | ||
| GE POE | Internal PoE Daughter Card Status | Green | PSU is installed and providing power |
| Amber | PSU is installed but in a failure condition. | ||
| Off | PSU is off. | ||
| FLASH | System Flash Status | Blinking Green | Compact flash/eUSB flash is present and currently being accessed. |
| TEMP | Temperature Status | Solid green | All temperature sensors in the system are within acceptable range. |
| Amber | One or more temperature sensors in the system are outside the acceptable range. | ||
| Off | Temperature is not being monitored. | ||
| PWR | System Power | Green | System power is on and functioning correctly. |
| Green blinking | System power is in the process of shutting down. | ||
| Amber | System power is up, but low level initialization failed. | ||
| Amber blinking | System power is up, but the system failed to come out of reset. | ||
| Off | System power is off. | ||
| POE BOOST | Power Over Ethernet Boost Mode | Green | Two PoE power supplies are installed and operating in boost mode. |
| Off | This can mean one of the following: ·No PoE PSU installed. ·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode. | ||
| ISC | ISC Slot Status | Green | PVDM4 is present and enabled. |
| Amber | Initialized with error. | ||
| Off | Not present. | ||
| FAN | Fan Status | Green | All fans are operating. |
| Amber | One fan has stopped working. | ||
| Blinking Amber | Two or more fans have stopped working, or the fan tray has been removed. | ||
| Off | Fans are not being monitored. | ||
| STAT | System Status | Solid green | System operating normally. |
| Blinking amber | BIOS/Rommon is booting. | ||
| Amber | BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. | ||
| Off | System is not out of reset or BIOS image is not loadable. |
| ① | GE management port | ⑤ | Console port |
| ② | Auxiliary port | ⑥ | GE Ports |
| ③ | USB Type A port | ⑦ | NIM Slots |
| ④ | USB Type B mini port | ||
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Descriptions |
|
Console and Auxillary Cables |
CAB-AUX-RJ45 |
Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
|
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Licenses |
L-SL-44-APP-K9= |
Cisco ISR 4431/4451 AppX license L-SL-44-APP-K9= with WAAS/vWAAS 1300/2500 conns RTU |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
NIM-8MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 4 shows the comparison chart.|
Models |
ISR4431-AX/K9 |
ISR4431/K9 |
|
Description |
Cisco ISR 4431 Advanced services router (2GE,2NIM,1SM,4G FLASH,4G DRAM,MPLS, OTV) |
Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) |
|
Aggregate Throughput |
500 Mbps to 1 Gbps |
500 Mbps to 1 Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
|
RJ-45-based ports |
4 |
4 |
|
SFP-based ports |
4 |
4 |
|
Enhanced service-module slots |
0 |
0 |
|
NIM slots |
3 |
3 |
|
Onboard ISC slot |
1 |
1 |
|
Rack height |
1 |
1 |