Filter Products
Show:

Showing 49–64 of 266 results

EHWIC-4G-LTE-G
Add to wishlist

EHWIC-4G-LTE-G

Login To See Price

Quick Specs

Figure 1 shows the appearance of EHWIC-4G-LTE-G. Table 1 shows the Quick Specs.

Product Name

EHWIC-4G-LTE-G

External Interfaces

 • Mini-USB interface for use with diagnostics and monitoring tools • Two TNC connectors with main and MIMO RF port for antenna connection • Separate active GPS with SMA (support with later Cisco IOS Software release) • Support for main and MIMO antenna connector

Form Factor

Single-wide EHWIC for Cisco ISR G2 platforms

Physical Dimensions (H x W x D)

0.75 x 3.08 x 4.9 in. (1.9 x 7.8 x 12.4 cm)

Weight

5.2 oz (147 grams)

Subscriber Identity Module (SIM) Card

4G LTE SIM card socket (USIM or mini-SIM)

Power

10.6 W peak (5.1 W typical)

Supported Platforms

Modular Cisco 1900, 2900, and 3900 Series ISR G2

Software Compatibility

Main Features Include

• Autoswitch failover between primary and backup links • Multichannel-interface-processor (MIP) profile configuration • 3G Simple Network Management Protocol Version 2 (SNMPv2) MIBs and traps • Remotely initiated data callback using voice • Remotely initiated data callback using SMS • Remote firmware upgrade over 4G LTE • Virtual diagnostic monitoring • SIM lock and unlock capability • Mobile routing: Enterprise Dynamic Mobile Network Routing (DMNR) based on Cisco Network Mobility (NEMO) • Receive diversity: For all supported bands , multiple-input and multiple-output (MIMO) on LTE • Density: Maximum EHWIC slots

SMS/GPS/Multiple Profile*

 • GPS antenna: SMA connector • Send and receive SMS (maximum 160 characters) • Separate standalone active GPS with SMA (available with 15.3(3)M1 in November, 2013) • Configure multiple profile (available with 15.3(3)M1 in November, 2013)

MIBs*

 • 3G MIB • Entity MIB • IF MIB • 3G WWAN MIB persistence • Enhanced 3G MIB for 4G MIB extension (available with 15.3(3)M1 in November, 2013)

Network Management and Diagnostics

 • In-band and out-of-band management using Telnet (Cisco IOS Software command-line interface [CLI]) and SNMP, including MIB II and other extensions • Industry-standard 4G LTE diagnostics and monitoring tools (QUALCOMM CDMA Air Interface Tester [CAIT] and Spirent Universal Diagnostic Monitor [UDM]

Modem Information

 • • EHWIC-4G-LTE-G: Sierra Wireless MC7710

Diagnostic

RSVD mini-USB port

Update

OTA-DM

Programming Interfaces

Cisco IOS Software CLI

Wireless Technologies Supported

 

EHWIC-4G-LTE-G

• LTE 800 MHz (band 20), 900 MHz (band 8), 1800 MHz (band 3), 2100 MHz (band 1), 2600 MHz (band 7)

Backward compatibility:

• UMTS and HSPA+ (DC-HSPA+): 900 and 2100 MHz • Tri-band EDGE, GPRS, andGSM

LED indicators

EHWIC-4G-LTE-A, EHWIC-4G-LTE-BE, EHWIC-4G-LTE-JP, EHWIC-4G-LTE-G

• WWAN LED (connection status indication) • RSSI • HSPA+ • GPS • LTE

Read more Compare
EHWIC-4G-LTE-BE
Add to wishlist

EHWIC-4G-LTE-BE

Login To See Price

Quick Spec

Brand Cisco
Model EHWIC-4G-LTE-BE
Network Compatibility Bell, Telus, Rogers
Band Support LTE AWS band 4 (1700/2100 MHz)
Interface High-Speed WAN Interface Card (HWIC)

Product Features

  • ● ● Supports LTE AWS band 4 frequencies (1700/2100 MHz).
  • ● ● Compatible with Bell, Telus, and Rogers networks in Canada.
  • ● ● High-speed mobile internet connectivity for business continuity.
  • ● ● Simple integration into existing Cisco router architectures.
  • ● ● Enhanced security for mobile data transmissions.

Product Applications

  • ● ● Backup internet connection for businesses to maintain productivity during primary network outages.
  • ● ● Remote locations requiring reliable internet access where wired connections are impractical.
  • ● ● Mobile networks for transport services, providing passengers with continuous internet access.

Supported Options

Accessory Model
4G Antenna ANT-4G-SR-MM
External Power Supply PWR-IE50W-AC
Cisco Router ISR4331/K9

Compare to Similar Items

Model Differences
Cisco EHWIC-3G-HSPA+ Supports HSPA+ networks, slower than 4G LTE.
Cisco EHWIC-4G-LTE-V Designed for Verizon networks, not compatible with Canadian providers.
Cisco EHWIC-4G-LTE-G Primarily supports European GSM networks, different frequency bands.
Read more Compare
NIM-2CE1T1-PRI
Add to wishlist

NIM-2CE1T1-PRI

Login To See Price

Quick Spec

The figure shows the appearance of NIM-2CE1T1-PRI. Table 1 shows the quick spec.
Product Number NIM-2CE1T1-PRI
Product Description 2 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module
Number of Ports 2
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)
Weight 0.42 lb (191g)

Supported Devices

Table 2 shows the supported devices for the NIM-2CE1T1-PRI.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-2CE1T1-PRI and NIM-8MFT-T1/E1.
Product Number NIM-2CE1T1-PRI NIM-8MFT-T1/E1
Product Description 2 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module 8 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module
Number of Ports 2 8
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)
Weight 0.42 lb (191g) 0.52 lb (236g)
Read more Compare
NIM-4E/M
Add to wishlist

NIM-4E/M

Login To See Price

Quick Spec

The figure shows the appearance of NIM-4E/M. Table 1 shows the quick spec.
Product Number NIM-4E/M
Product Description 4-Port E/M Network Interface Module
Number of Ports 4
Cisco IOS Release XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.44 lb (200 g)

Supported Devices

Table 2 shows the supported devices for the NIM-4E/M.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-4E/M and NIM-2FXS.
Product Number NIM-4E/M NIM-2FXS
Product Description 4-Port E/M Network Interface Module 2-Port Network Interface Module - FXS, FXS-E and DID
Number of Ports 4 2
Cisco IOS Release XE3.14.3, XE3.15.1, XE3.16 and above XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.44 lb (200 g) 0.42 lb (191 g)
Read more Compare
NIM-2FXS
Add to wishlist

NIM-2FXS

Login To See Price

Quick Spec

The figure shows the appearance of NIM-2FXS. Table 1 shows the quick spec.
Product Number NIM-2FXS
Product Description 2-Port Network Interface Module - FXS, FXS-E and DID
Number of Ports 2
Cisco IOS Release XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.42 lb (191 g)

Supported Devices

Table 2 shows the supported devices for the NIM-2FXS.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-2FXS and NIM-2FXS/4FXO.
Product Number NIM-2FXS NIM-2FXS/4FXO
Product Description 2-Port Network Interface Module - FXS, FXS-E and DID 2-Port FXS/FXS-E/DID and 4-Port FXO Network Interface Module
Number of Ports 2 2
Cisco IOS Release XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.42 lb (191 g) 0.52 lb (236g)
Read more Compare
NIM-2FXS/4FXO
Add to wishlist

NIM-2FXS/4FXO

Login To See Price

Quick Spec

The figure shows the appearance of NIM-2FXS/4FXO. Table 1 shows the quick spec.
Product Number NIM-2FXS/4FXO
Product Description 2-Port FXS/FXS-E/DID and 4-Port FXO Network Interface Module
Number of Ports 6
Cisco IOS Release XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.52 lb (236 g)

Supported Devices

Table 2 shows the supported devices for the NIM-2FXS/4FXO.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-2FXS/4FXO and NIM-2FXS.
Product Number NIM-2FXS/4FXO NIM-2FXS
Product Description 2-Port FXS/FXS-E/DID and 4-Port FXO Network Interface Module 2-Port Network Interface Module - FXS, FXS-E and DID
Number of Ports 6 2
Cisco IOS Release XE3.14.3, XE3.15.1, XE3.16 and above XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.52 lb (236 g) 0.42 lb (191 g)
Read more Compare
NIM-8MFT-T1/E1
Add to wishlist

NIM-8MFT-T1/E1

Login To See Price

Quick Spec

The figure shows the appearance of NIM-8MFT-T1/E1. Table 1 shows the quick spec.
Product Number NIM-8MFT-T1/E1
Product Description 8 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module
Number of Ports 8
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)
Weight 0.52 lb (236g)

Supported Devices

Table 2 shows the supported devices for the NIM-8MFT-T1/E1.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-8MFT-T1/E1 and NIM-2CE1T1-PRI.
Product Number NIM-8MFT-T1/E1 NIM-2CE1T1-PRI
Product Description 8 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module 2 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module
Number of Ports 8 2
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)
Weight 0.52 lb (236g) 0.42 lb (191g)
Read more Compare
NIM-2GE-CU-SFP
Add to wishlist

NIM-2GE-CU-SFP

Login To See Price

Quick Spec

The figure shows the appearance of NIM-2GE-CU-SFP. Table 1 shows the quick spec.
Product Number NIM-2GE-CU-SFP
Product Description 2-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module
Supported Devices Cisco 4000 Series Integrated Services Router
Form Factor NIM
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm)
Weight 252 grams

Supported Devices

Table 2 shows the supported devices for the NIM-2GE-CU-SFP.
Product number Model Description
CISCO ISR4221/K9 Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB) 35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM
CISCO ISR4221-SEC/K9 Cisco ISR 4221 SEC Bundle with SEC lic 35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, SEC Bundle with SEC lic
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-2GE-CU-SFP and NIM-1GE-CU-SFP.
Product Number NIM-2GE-CU-SFP NIM-1GE-CU-SFP
Product Description 2-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module 1-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module
Supported Devices Cisco 4000 Series Integrated Services Router Cisco 4000 Series Integrated Services Router
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm)
Weight 252 grams 240 grams
Read more Compare
SM-X-6X1G
Add to wishlist

SM-X-6X1G

Login To See Price

Quick Spec

The figure shows the appearance of SM-X-6X1G. Table 1 shows the quick spec.
Product Number SM-X-6X1G
Product Description 6-port Gigabit Ethernet, dual-mode GE/SFP, SM-X Module
Form Factor Single-wide Enhanced Service Module (SM-X)
Dimensions (H x W x D) 1.57 x 8.11 x 8.15 in (40 x 206 x 207 mm)
Weight 872 grams

Compare to Similar Items

Table 3 shows the comparison between SM-X-6X1G and NIM-2GE-CU-SFP.
Product Number SM-X-6X1G NIM-2GE-CU-SFP
Product Description 6-port Gigabit Ethernet, dual-mode GE/SFP, SM-X Module 2-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module
Dimensions (H x W x D) 1.57 x 8.11 x 8.15 in (40 x 206 x 207 mm) 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm)
Weight 872 grams 252 grams
Read more Compare
SM-X-NIM-ADPTR
Add to wishlist

SM-X-NIM-ADPTR

Login To See Price

Quick Spec

The figure shows the appearance of SM-X-NIM-ADPTR. Table 1 shows the quick spec.
Product Number SM-X-NIM-ADPTR
Product Description Cisco 4000 Series Integrated Services Router Network Interface Module Adapter for SM-X Slot SM-X-NIM-ADPTR

Read more Compare
NIM-ES2-4=
Add to wishlist

NIM-ES2-4=

Login To See Price

Quick Specs

Figure 1 shows the appearance of NIM-ES2-4=. Table 1 shows the Quick Specs.
Product Code NIM-ES2-4=
Form factor Single-wide NIM form factor
Ports 4-port Gigabit Ethernet
Dimensions (H x W x D) 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm)
Weight 79g (0.17 lb)

Platform Support

Table 2 shows recommended platforms that support the 4-port Cisco Gigabit Ethernet LAN Switch NIMs.
Platform Platform Maximum Support
Cisco 4221 2
Cisco 4321 2
Cisco 4331 2
Cisco 4351 3
Cisco 4431 3
Cisco 4451 3

Compare to Similar Items

Table 3 shows the similar items.
Model NIM-ES2-4= NIM-ES2-8
Form factor Single-wide NIM form factor Single-wide NIM form factor
Ports 4-port Gigabit Ethernet 8-port Gigabit Ethernet
Dimensions (H x W x D) 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm) 0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
Weight 79g (0.17 lb) 108g (0.24 lb)
Read more Compare
WIC-1ADSL-T1 (USED)
Add to wishlist

WIC-1ADSL-T1 (USED)

Login To See Price

Quick Spec

Brand Cisco
Model WIC-1ADSL-T1
Interface WAN
Type Router WAN Interface Card
Condition Used

Product Features

  • ● ● Seamless integration with Cisco routers
  • ● ● Provides high-speed ADSL connections
  • ● ● Reliable performance with minimal downtime
  • ● ● Cost-effective solution for extending your network
  • ● ● Supports a wide range of Cisco routers

Product Applications

  • ● ● Expanding small to medium-sized business network capacity
  • ● ● Providing high-speed internet connectivity for remote branch offices
  • ● ● Enabling reliable home office networking solutions

Supported Options

Accessory Model
Cisco CAB-ADSL-RJ11 Cable CAB-ADSL-RJ11
Cisco Power Supply PS-12V-2A
Replacement Mounting Kit RK-MNT-1

Compare to Similar Items

Model Differences
Cisco WIC-1ADSL Lacks T1 support
Cisco HWIC-1ADSL Newer model with higher throughput
Cisco WIC-1SHDSL Supports SHDSL instead of ADSL
Read more Compare
NIM-1MFT-T1/E1
Add to wishlist

NIM-1MFT-T1/E1

Login To See Price

Quick Specs

Table 1 shows the Quick Specs.

Model

NIM-1MFT-T1/E1

Serial data (channel-group*)

2 per port

E1 unframed G.703

Not supported

Voice channel associated signaling (CAS) (ds0-group)

24 per port (T1)

31 per port (E1)

1 per timeslot

PRI (pri-group*)

1 per port

Drop and insert

(tdm-group)

24 per port (T1)

31 per port (E1)

1 per timeslot
Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)
* channel-group refers to bonding of one or more time slots into a single High-Level Data Link Control (HDLC)-framed serial connection for IP data traffic connectivity. This connection is used for HDLC, Frame Relay, and Multilink PPP (MLPPP) serial WAN connections. ds0-group refers to bonding of one or more time slots into a single TDM voice connection using CAS such as ear and mouth (E&M), foreign exchange station (FXS), or foreign exchange office (FXO). This connection is used for TDM PBX or PSTN connections and typically is deployed only on T1. * pri-group refers to bonding of two or more time slots into a single TDM connection using ISDN signaling. This connection is typically used for TDM PBX or PSTN voice connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1 and channel 31 on an E1. tdm-group refers to cross-connecting one or more time slots from one TDM interface to another. This connection is used to groom channels from different access points onto a combined T1 or E1 uplink. Because the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice and data) is transparent to the router.
Read more Compare
NIM-4FXO
Add to wishlist

NIM-4FXO

Login To See Price

Quick Spec

The figure shows the appearance of NIM-4FXO. Table 1 shows the quick spec.
Product Number NIM-4FXO
Product Description 4-port Network Interface Module - FXO (Universal)
Number of Ports 4
Cisco IOS Release XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.44 lb (200 g)

Supported Devices

Table 2 shows the supported devices for the NIM-4FXO.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-4FXO and NIM-4E/M.
Product Number NIM-4FXO NIM-4E/M
Product Description 4-port Network Interface Module - FXO (Universal) 4-Port E/M Network Interface Module
Number of Ports 4 4
Cisco IOS Release XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.44 lb (200 g) 0.44 lb (200 g)
Read more Compare
PVDM4-64
Add to wishlist

PVDM4-64

Login To See Price

Quick Specs

Figure 1 shows the appearance of PVDM4-64. Table 1 shows the Quick Specs.
Product Code PVDM4-64
Slot On-board motherboard or T1/E1 module slot
Description 64-channel high-density voice DSP module
Low Complexity 64
Medium Complexity 48
High Complexity 32

Compare to Similar Items

Table 2 shows the comparison of PVDM4-64, PVDM4-32 and PVDM4-128.

Product Code PVDM4-64 PVDM4-32 PVDM4-128
Slot On-board motherboard or T1/E1 module slot On-board motherboard or T1/E1 module slot On-board motherboard or T1/E1 module slot
Description 64-channel high-density voice DSP module 32-channel high-density voice DSP module 128-channel high-density voice DSP module
Low Complexity 64 32 128
Medium Complexity 48 24 96
High Complexity 32 16 64

Read more Compare
PVDM4-128
Add to wishlist

PVDM4-128

Login To See Price

Quick Specs

Figure 1 shows the appearance of PVDM4-128. Table 1 shows the Quick Specs.
Product Code PVDM4-128
Slot On-board motherboard or T1/E1 module slot
Description 128-channel high-density voice DSP module
Low Complexity 128
Medium Complexity 96
High Complexity 64

Compare to Similar Items

Table 2 shows the comparison of PVDM4-64, PVDM4-32 and PVDM4-128.

Product Code PVDM4-64 PVDM4-32 PVDM4-128
Slot On-board motherboard or T1/E1 module slot On-board motherboard or T1/E1 module slot On-board motherboard or T1/E1 module slot
Description 64-channel high-density voice DSP module 32-channel high-density voice DSP module 128-channel high-density voice DSP module
Low Complexity 64 32 128
Medium Complexity 48 24 96
High Complexity 32 16 64
Read more Compare

Filter Products

Categories

  • No categories

Product Categories

Filter by price

Product Status

Brands