No products in the cart.
Showing 113–128 of 266 results
Quick Specs
Table 1 shows the Quick Specs.
| Product Code | CPAK-10X10G-ERL= |
| Description | 10x10G-ERL Cisco CPAK Module for SMF |
| Dimensions | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) |
| Wavelength (nm) | 1550 |
| Cable Type | SMF (24 fibers) |
| Core Size (Microns) | 9-micron coreSMF per G.652 |
| Modal Bandwidth (MHz*km) | \ |
| Cable Distance | 25 km |
Product Details
Table 2 Cisco CPAK 100GBASE module features and benefits| Requirement | Cisco CPAK Module Supporting Feature |
| Accommodate ever-growing bandwidth requirements | Up to 10 100-Gigabit Ethernet connections deliver as much as 1 Tbps of front-panel bandwidth |
|
Control costs |
Form factor consumes 40% less power than CFP2 and 70% less power than CFP form factors |
|
Real estate conservation |
Minimal footprint allows 20% greater port density and bandwidth than competing products |
|
High availability for business continuity |
Hot-swappable input/output device plugs into a Cisco CPAK-module-based switch, router, or optical platform port |
|
Accommodate a variety of distance and fiber type requirements |
Flexible interface choices |
|
Investment protection, affordable migration to higher bandwidth |
Support for a pay-as-you-grow model Can plug any Cisco 100-Gbps, 40-Gbps, and 10-Gbps line cards into Cisco CPAK modules (supports the Cisco AnyPort solution) |
|
Manage performance |
Digital Optical Monitoring (DOM) support |
|
Proper functioning and high performance with all Cisco platforms |
Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco |
|
Standards compliance for equipment flexibility and choice |
Interoperability with any IEEE-compliant: 100GBASE-SR4, 100GBASE-LR4, 100GBASE-SR10, 40GBASE-SR4, 10GBASE-SR, 10GBASE-LR |
Platform support
Cisco CPAK 100GBASEmodules are supported on Cisco high-end switches, routers, and transport equipment: ASR 9000 Series Router CRS-X Carrier Routing System NCS 2000, 4000, and 6000 Series Routers Nexus 7000 and 7700 Series Switches Cisco ONS Transport PlatformCompare to Similar Items Table 3shows the comparison.| Parameters | CPAK-10X10G-ERL= | CPAK-10X10G-LR= |
| Description | 10x10G-ERL Cisco CPAK Module for SMF | 10x10G-LR Cisco CPAK Module for SMF |
| Dimensions | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) |
| Wavelength (nm) | 1550 | 1310 |
| Fiber Type | SMF (24 fibers) | SMF (24 fibers) |
| Core Size (microns) | 9-micron coreSMF per G.652 | 9-micron coreSMF per G.652 |
| Modal Bandwidth (MHz-km) | \ | \ |
| Max Distance | 25 km | 10 km |
| Power consumption | At 70 C: 5.0W maximum | At 70 C: 5.0W maximum |
Quick Specs
Table 1 shows the Quick Specs.| Product Code | CPAK-10X10G-LR= |
| Description | 10x10G-LR Cisco CPAK Module for SMF |
| Dimensions | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) |
| Wavelength (nm) | 1310 |
| Cable Type | SMF (24 fibers) |
| Core Size (Microns) | 9-micron coreSMF per G.652 |
| Modal Bandwidth (MHz*km) | \ |
| Cable Distance | 10 km |
Product Details
Table 2Cisco CPAK 100GBASE module features and benefits| Requirement | Cisco CPAK Module Supporting Feature |
| Accommodate ever-growing bandwidth requirements | Up to 10 100-Gigabit Ethernet connections deliver as much as 1 Tbps of front-panel bandwidth |
|
Control costs |
Form factor consumes 40% less power than CFP2 and 70% less power than CFP form factors |
|
Real estate conservation |
Minimal footprint allows 20% greater port density and bandwidth than competing products |
|
High availability for business continuity |
Hot-swappable input/output device plugs into a Cisco CPAK-module-based switch, router, or optical platform port |
|
Accommodate a variety of distance and fiber type requirements |
Flexible interface choices |
|
Investment protection, affordable migration to higher bandwidth |
Support for a pay-as-you-grow model Can plug any Cisco 100-Gbps, 40-Gbps, and 10-Gbps line cards into Cisco CPAK modules (supports the Cisco AnyPort solution) |
|
Manage performance |
Digital Optical Monitoring (DOM) support |
|
Proper functioning and high performance with all Cisco platforms |
Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco |
|
Standards compliance for equipment flexibility and choice |
Interoperability with any IEEE-compliant: 100GBASE-SR4, 100GBASE-LR4, 100GBASE-SR10, 40GBASE-SR4, 10GBASE-SR, 10GBASE-LR |
Platform support
Cisco CPAK100GBASEmodules are supported on Cisco high-end switches, routers, and transport equipment: ASR 9000 Series Router CRS-X Carrier Routing System NCS 2000, 4000, and 6000 Series Routers Nexus 7000 and 7700 Series Switches Cisco ONS Transport PlatformCompare to Similar ItemsCompare to Similar Items
Table 3shows the comparison.| Parameters | CPAK-10X10G-ERL= | CPAK-10X10G-LR= |
| Description | 10x10G-ERL Cisco CPAK Module for SMF | 10x10G-LR Cisco CPAK Module for SMF |
| Dimensions | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) |
| Wavelength (nm) | 1550 | 1310 |
| Fiber Type | SMF (24 fibers) | SMF (24 fibers) |
| Core Size (microns) | 9-micron coreSMF per G.652 | 9-micron coreSMF per G.652 |
| Modal Bandwidth (MHz-km) | \ | \ |
| Max Distance | 25 km | 10 km |
| Power consumption | At 70 C: 5.0W maximum | At 70 C: 5.0W maximum |
Quick Spec
| Product Type | SFP+ Transceiver Module |
| Max Data Rate | 10 Gbps |
| Wavelength | 1590 nm |
| Reach | Up to 40 km |
| Connector Type | LC Duplex |
Product Features
- ● High-speed data transfer rate of 10 Gbps
- ● Operates at a wavelength of 1590 nm
- ● Compatible with a variety of Cisco networking equipment
- ● Supports Digital Optical Monitoring (DOM) for enhanced monitoring and diagnostics
- ● Low power consumption and efficient cooling
Product Applications
- ● High-performance data centers requiring 10 Gigabit Ethernet connectivity
- ● Long-distance communications in campus or metropolitan area networks
- ● Upgrading existing network infrastructure to support higher bandwidth and lower latency
Supported Options
| Cable 1 | Cisco CAB-SFP-10G-1M |
| Cable 2 | Cisco CAB-SFP-10G-3M |
| Cable 3 | Cisco CAB-SFP-10G-5M |
Compare to Similar Items
| Model | Difference |
| CWDM-SFP10G-1470= | Wavelength: 1470 nm |
| CWDM-SFP10G-1510= | Wavelength: 1510 nm |
| CWDM-SFP10G-1530= | Wavelength: 1530 nm |
Quick Spec
| Bandwidth | 10 Gbps |
| Wavelength | 1570 nm |
| Transmission Distance | Up to 80 km |
| Form Factor | SFP+ |
| Connector Type | Duplex LC |
Product Features
- ● Supports up to 10 Gbps Ethernet data rates.
- ● Utilizes CWDM technology to enhance bandwidth capacity.
- ● Operates at a wavelength of 1570 nm, ideal for long-distance transmission.
- ● Comes in a hot-swappable SFP+ form factor for ease of installation.
- ● Compatible with a wide range of Cisco networking equipment.
Product Applications
- ● Interconnecting data centers over metropolitan area networks (MANs).
- ● Expanding network capacity in enterprise campus networks.
- ● Supporting high-bandwidth applications such as video streaming and data backup.
Supported Options
| Accessory | Model |
| CWDM Multiplexer/Demultiplexer | CISCO-CWDM-MUX-8A= |
| Fiber Optic Cable | CISCO-FC-CABLE-50CM= |
| Optical Attenuator | CISCO-OA-10DB= |
Quick Spec
| Wavelength | 1550 nm |
| Data Rate | 10 Gbps |
| Connector Type | Dual LC |
| Maximum Distance | 40 km |
| Form Factor | SFP+ |
Product Features
- ● Supports 10 Gigabit Ethernet for high-speed data networks.
- ● CWDM technology to maximize the capacity of fiber infrastructure.
- ● Operates at a 1550 nm wavelength for optimal performance.
- ● Hot-swappable to minimize downtime during installation.
- ● Low power consumption for energy-efficient operation.
Product Applications
- ● High-speed metropolitan area networks (MANs).
- ● Data center interconnects requiring robust and scalable connections.
- ● Enterprise networks needing extended reach and multiple wavelength support.
Supported Options
| Option | Model |
| CWDM Dispersion Compensation Module | DMD-C-1550 |
| Single-Mode Fiber Patch Cable | SMF-2M |
| Optical Power Meter | OPM-10G |
Compare to Similar Items
| Item | Difference |
| CWDM-SFP10G-1470= | Operates at a 1470 nm wavelength |
| CWDM-SFP10G-1590= | Operates at a 1590 nm wavelength |
| DWDM-SFP10G-40= | Uses Dense Wavelength Division Multiplexing technology |
Quick Spec
| Product Type | SFP+ Transceiver Module |
| Wavelength | 1610 nm |
| Data Rate | 10 Gigabit Ethernet |
| Compatibility | Cisco Switches/Routers |
| Interface | LC Duplex Connector |
Product Features
- ● Hot-swappable to maximize uptime and simplify serviceability.
- ● Supports a wavelength of 1610 nm for efficient data transmission.
- ● Ensures high-speed data transfer of 10 Gigabit Ethernet.
- ● Compatible with a range of Cisco switches and routers for versatile deployment.
- ● Compact SFP+ design for space-efficient fiber connections.
Product Applications
- ● Extended-range data center connectivity, linking different data centers over metropolitan area networks (MANs).
- ● Telecommunication networks that require reliable high-speed data transfer over long distances.
- ● Enterprise networks needing to maintain high bandwidth across large campus areas or between buildings.
Supported Options
| Accessory | Model |
| CWDM Multiplexer/Demultiplexer | CWDM-MUX-8A= |
| 10GBase CWDM SMF Patch Cable | CAB-SM-10G-3M= |
| Fiber Optic Cleaner | FOC-CLEAN= |
Compare to Similar Items
| Model | Differences |
| CWDM-SFP10G-1490= | Operates at 1490 nm wavelength instead of 1610 nm. |
| CWDM-SFP10G-1530= | Operates at 1530 nm wavelength with similar data rates. |
| CWDM-SFP10G-1570= | Operates at 1570 nm wavelength, also designed for 10 Gigabit Ethernet. |
Quick Specs
Table 1 shows the Quick Specs.| Product Code | QSFP-100G-SM-SR= |
| Description | Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C |
| Dimensions | 13.5 x 18.4 x 72.4 mm |
| Nominal Wavelength (nm) | 1271, 1291, 1311, 1331 |
| Cable Type | SMF |
| Core Size (Microns) | G.652 |
| Modal Bandwidth (MHz*km) | \ |
| Cable Distance | 2km |
| Power Consumption (W) | 3.5 |
| Pull Tab Color | Green |
Product Details
QSFP-100G Optical modulesprovide these highlights: Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port Interoperable with other IEEE-compliant 100GBASE interfaces where applicable Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability High-speed electrical interface compliant to IEEE 802.3bmCompare to Similar Items
Table 2shows the comparison.| Product Code | QSFP-100G-CWDM4-S= | QSFP-100G-ER4L-S= | QSFP-100G-LR4-S= | QSFP-100G-PSM4-S= | QSFP-100G-SM-SR= | QSFP-100G-SR4-S= | QSFP-40/100-SRBD= |
| Description | Cisco 100GBASE CWDM4 QSFP Transceiver, LC, 2km over SMF | Cisco 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC | 100GBASE LR4 QSFP Transceiver, LC, 10km over SMF | 100GBASE PSM4 QSFP Transceiver, MPO, 500m over SMF | Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C | 100GBASE SR4 QSFP Transceiver, MPO, 100m over OM4 MMF | 100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF |
| Dimensions | 13.5 x 18.4 x 72.4 mm | 13.5 x 18.4 x 72.4 mm | 13.5 x 18.4 x 72.4 mm | 13.5 x 18.4 x 72.4 mm | 13.5 x 18.4 x 72.4 mm | 13.5 x 18.4 x 72.4 mm | 13.5 x 18.4 x 72.4 mm |
| Nominal Wavelength (nm) | 1271, 1291, 1311, 1331 | 1295, 1300, 1304, 1309 | 1295, 1300, 1304, 1309 | 1310 | 1271, 1291, 1311, 1331 | 850 | 855, 908 |
| Cable Type | SMF | SMF | SMF | SMF | SMF | MMF | MMF |
| Core Size (Microns) | G.652 | G.652 | G.652 | G.652 | G.652 | 50.0 50.0 | 50.0 50.0 |
| Modal Bandwidth (MHz*km) | \ | \ | \ | \ | \ | 2000 (OM3) 4700 (OM4) | 2000 (OM3) 4700 (OM4) |
| Cable Distance | 2km | 40km (with host FEC) 30km (without host FEC) | 10km | 500m | 2km | 70m 100m | 70m 100m |
| Power Consumption (W) | 3.5 | 4.5 | 4.0 | 3.5 | 3.5 | 3.5 | 3.5 |
| Pull Tab Color | Green | Rad | Blue | Orange | Green | Beige | Gray |
Quick Spec
Table 1 shows the quick spec.| Product Model | SFP-10G-ER-S= |
| Data Rate | 10 Gbps |
| Wavelength | 1550 nm |
| Maximum Distance | 40 km |
| Connector Type | LC |
| Fiber Type | Single-mode |
Quick Spec
Table 1 shows the quick spec.| Brand | Cisco |
| Product Model | SFP-10G-ZR-S= |
| Product Type | SFP+ Transceiver |
| Data Rate | 10 Gbps |
| Connector Type | LC duplex |
| Cable Type | Single-mode fiber |
| Wavelength | 1550 nm |
| Max Distance | 80 km |
| Compatibility | Cisco networking equipment |
Quick Spec
| Brand | Cisco |
| Product Name | QSFP-100G-FR-S= |
| Form Factor | QSFP28 |
| Maximum Distance | 2 km |
| Connector Type | Duplex LC |
Product Features
- ● Supports 100G-FR standard for high-speed data transmission.
- ● Operates over single-mode fiber with a reach of up to 2 kilometers.
- ● Compact QSFP28 form factor enhances port density.
- ● Compliant with IEEE 802.3cd standards for reliable performance.
- ● Duplex LC connector ensures compatibility with existing infrastructure.
Product Applications
- ● Ideal for data center interconnects requiring 100G speeds over short distances.
- ● Suitable for enterprise core and distribution layers to enhance network capacity.
- ● Utilized in telecom networks where high bandwidth and cost-efficiency are critical.
Supported Options
| Accessory | Model |
| Cisco QSFP28 Adapter | A28-QSFP-ADAP |
| 2m Duplex LC Fiber Cable | FIB-LC2M |
| Cable Management Kit | CAB-MGMT-KIT |
Compare to Similar Items
| Model | Differences |
| Cisco QSFP-100G-SR4-S | Supports up to 100 meters on OM4 multimode fiber |
| Cisco QSFP-100G-LR4-S | Supports up to 10 kilometers on single-mode fiber |
| Cisco QSFP-100G-ER4-S | Supports up to 40 kilometers on single-mode fiber |
QDD-2X100-CWDM4-S Product Highlights
QDD-2X100-CWDM4-S Product Application Scenarios
- ● Cisco branded
- ● 2x100G data rate
- ● QSFP-DD form factor
- ● 2km SMF support
- ● Dual Duplex CS interface
| Feature | Cisco QDD-2X100-CWDM4-S | Arista QSFP-100G-CWDM4 | Juniper JNP-QSFP-100G-CWDM4 | Intel TX10-QSFP-DD-100G | Brocade QSFP-100G-CWDM4-2 | HPE JH321A | Extreme 100G-QSFP-DD |
|---|---|---|---|---|---|---|---|
| Data Rate | 2x100G | 100G | 100G | 100G | 100G | 100G | 2x100G |
| Form Factor | QSFP-DD | QSFP+ | QSFP+ | QSFP-DD | QSFP+ | QSFP+ | QSFP-DD |
| Transmission Distance | 2km | 2km | 2km | 2km | 2km | 2km | 2km |
| Interface | Dual Duplex CS | LC Duplex | LC Duplex | Dual Duplex CS | LC Duplex | LC Duplex | Dual Duplex CS |
| Wavelength | CWDM4 | CWDM4 | CWDM4 | CWDM4 | CWDM4 | CWDM4 | CWDM4 |
| Compatibility | Cisco | Arista | Juniper | Intel | Brocade | HPE | Extreme |
- ● Data center interconnects
- ● Telecom network upgrades
- ● Long-distance backbone networks
| Accessory Model | Description |
|---|---|
| CAB-Q-Q-100G-1M | 1m QSFP-DD to QSFP-DD Cable |
| CAB-L-100G | 100G LR4 Optical Module |
| APC-QSFP-100G-SR | 100G SR4 Transceiver |
Quick Spec
| Brand | Cisco |
| Model | EPA-CPAK-2X40GE= |
| Compatibility | ASR 1000 Series |
| Port Type | 2x 40GE CPAK |
| Requirement | Breakout Cable |
Product Features
- ● High-speed data transfer with 40GE CPAK interfaces
- ● Compatibility with Cisco ASR 1000 series routers
- ● Easy installation as a spare part
- ● Requires breakout cable for versatile connectivity
- ● Reliable performance for business-critical applications
Product Applications
- ● Enterprise network expansion scenarios where additional 40GE ports are required
- ● Data center networks needing high-performance data transfer and reliability
- ● Service provider networks that demand robust and scalable solutions
Supported Options
| Breakout Cable | CPA-BRKOUT-4x10G |
| Optical Modules | CPAK-40GE-SR4 |
| Power Supply | PWR-3KW-ACV |
Compare to Similar Items
| Model | EPA-CPAK-2X40GE= | C9500-40X-A | Nexus 3232C |
| Ports | 2x 40GE CPAK | 40x 10GE | 32x 100GE |
| Compatibility | ASR 1000 Series | Catalyst 9500 Series | Cisco Nexus Series |
| Power Consumption | Low | Medium | High |
| Scalability | Moderate | High | Very High |
Quick Spec
The figure shows the appearance of NIM-1GE-CU-SFP. Table 1 shows the quick spec.| Product Number | NIM-1GE-CU-SFP |
| Product Description | 1-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module |
| Supported Devices | Cisco 4000 Series Integrated Services Router |
| Form Factor | Network Interface Module (NIM) |
| Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) |
| Weight | 240 grams |
Supported Devices
Table 2 shows the supported devices for the NIM-1GE-CU-SFP.| Product number | Model | Description |
| CISCO ISR4221/K9 | Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB) | 35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM |
| CISCO ISR4221-SEC/K9 | Cisco ISR 4221 SEC Bundle with SEC lic | 35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, SEC Bundle with SEC lic |
| Cisco ISR4321/K9 | Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) | 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC |
| Cisco ISR4331/K9 | Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) | 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
| Cisco ISR4351/K9 | Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) | 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
| Cisco ISR4431/K9 | Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) | 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs |
Compare to Similar Items
Table 3 shows the comparison between NIM-1GE-CU-SFP and NIM-2GE-CU-SFP.| Product Number | NIM-1GE-CU-SFP | NIM-2GE-CU-SFP |
| Product Description | 1-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module | 2-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module |
| Supported Devices | Cisco 4000 Series Integrated Services Router | Cisco 4000 Series Integrated Services Router |
| Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) | 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) |
| Weight | 240 grams | 252 grams |
Quick Spec
Table 1 shows the quick spec of the CISCO891-K9.| Product Code | CISCO891-K9 |
| Manufacturer | Cisco |
| Description | Cisco 891 GigaE SecRouter |
Product Features
- ● High-Speed Connectivity: The CISCO891-K9 offers Gigabit Ethernet connectivity for high-speed network connections.
- ● Enhanced Security: This security router has advanced features to protect your network from threats and attacks.
- ● Wide Range of Services: The router supports data, voice, video, and wireless services, enhancing business communication and productivity.
Quick Spec
Table 1 shows the quick spec.| Product Code | CISCO892-K9 |
| Description | Cisco 892 Gigabit Ethernet security router |
| Default and maximum DRAM | 768 MB |
| Default and maximum flash memory | 256 MB |
| WAN | 1-port GE 1-port FE |
| LAN switch | 8-port 10-/100-Mbps managed switch |
| Physical dimensions and weight | Product dimensions:
Nonwireless models:
|
Product Details
Figure 1 shows the front panel of CISCO892-K9. Figure 2 shows the back panel of CISCO892-K9.Compare to Similar Items
Table 2 shows the comparison between CISCO892-K9 and CISCO892W-AGN-E-K9.| Product Code | CISCO892-K9 | CISCO892W-AGN-E-K9 |
| Description | Cisco 892 Gigabit Ethernet security router | Cisco 892W Gigabit Ethernet security router with802.11n,ETSI compliant |
| Default and maximum DRAM | 768 MB | 768 MB |
| Default and maximum flash memory | 256 MB | 256 MB |
| Physical dimensions and weight | Product dimensions:
Nonwireless models:
|
Product dimensions:
Wireless models:
|
Quick Specs
Table 1 shows the Quick Specs.| Product Code | C891F-K9 |
| Rack Units | 1RU |
| WAN Ports | 1-port GE or 1port SFP 1-port FE |
| LAN Ports | 8-port 10-/100-/1000-Mbps managed switch (4ports PoE capable with 125W power supply adapter) |
| 802.11a/g/n Option | Yes Cisco CleanAir technology |
| Integrated USB 2.0/AUX/Console | Yes |
| DRAM | 512MB |
| Flash Memory | 256MB |
| Dimensions | 4.62 x 32.28 x 24.84 cm (includes rubber feet) 4.45 x 32.28 x 24.84 cm (without rubber feet) |
| Package Weight | 4.49 Kg |
Product Details
Figure 1 shows the front panel of C891F-K9. Figure 2 shows the back panel of C891F-K9. Note:| ① | Back up WAN port—FE WAN | ⑧ | Console/Auxiliary port |
| ② | ISDN | ⑨ | Power connector |
| ③ | Primary WAN port—GE WAN | ⑩ | On/Off switch |
| ④ | SFP | Reset button | |
| ⑤ | USB port | Earth ground connection | |
| ⑥ | V.92 backup | Kensington security slot | |
| ⑦ | 8 x port 10/100/1000 Ethernet Ports with 4 x PoE Ports |
The Configuration
Table 2 shows the recommended configuration of C891F-K9 router.| Items | Description |
| CAB-AC= | CAB-AC= AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| S890VK9-15001M | Cisco 890 Series IOS UNIVERSAL |
| MEM8XX-256U512D | DRAM Upgrade |
| ISR-CCP-EXP ? | Cisco Config Pro Express on Router Flash |
| CAB-ETH-S-RJ45 | Cisco Router Cable CAB-ETH-S-RJ45 |
| PWR-60W-AC | Power Supply 60 Watt AC |
| SL-890-AIS | Cisco 890 Advanced IP Services License |
| GLC-LH-SM | GE SFP, LC connector LX/LH transceiver |
| GLC-SX-MM | GE SFP, LC connector SX transceiver |
| GLC-ZX-SM | 1000BASE-ZX SFP |
Compare to Similar Items
Table 3 shows the comparison between C881-K9 and C891F-K9.| Models | C881-K9 | C891F-K9 |
| Interfaces | - LAN: 4 x 10Base-T/100Base-TX? - Management: 1 x console - WAN : 1 x 10Base-T/100Base-TX - USB : 1 x 4 PIN USB Type A | - LAN: 8 x Gigabit ports; 1 x Fast Ethernet ports - Uplink: 1 x SFP ports - Management: 1 x console - USB : 1 x 4 PIN USB Type A |
| POE | 2 port integrated PoE | 4 POE ports |
| FAN | Fanless chassis | Fanless chassis |