SFP-GE-L

Quick Specs

Table 1 shows the Quick Specs.

Model	NIM-1MFT-T1/E1
Serial data (channel-group*)	2 per port
E1 unframed G.703	Not supported
Voice channel associated signaling (CAS) (ds0-group)	24 per port (T1) 31 per port (E1) 1 per timeslot
PRI (pri-group*)	1 per port
Drop and insert (tdm-group)	24 per port (T1) 31 per port (E1) 1 per timeslot
Dimensions (H x W x D)	1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)

* channel-group refers to bonding of one or more time slots into a single High-Level Data Link Control (HDLC)-framed serial connection for IP data traffic connectivity. This connection is used for HDLC, Frame Relay, and Multilink PPP (MLPPP) serial WAN connections. ds0-group refers to bonding of one or more time slots into a single TDM voice connection using CAS such as ear and mouth (E&M), foreign exchange station (FXS), or foreign exchange office (FXO). This connection is used for TDM PBX or PSTN connections and typically is deployed only on T1. * pri-group refers to bonding of two or more time slots into a single TDM connection using ISDN signaling. This connection is typically used for TDM PBX or PSTN voice connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1 and channel 31 on an E1. tdm-group refers to cross-connecting one or more time slots from one TDM interface to another. This connection is used to groom channels from different access points onto a combined T1 or E1 uplink. Because the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice and data) is transparent to the router.

Quick Specs

Figure 1 shows the appearance ofSPA-8X1GE-V2=. Table 1 shows the Quick Specs.

Product Code	SPA-8X1GE-V2=
Product compatibility	*Cisco 12000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) *Cisco XR 12000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) *Cisco ASR 1000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) *Cisco CRS Carrier Routing System (5-, 8-, and 10-port GE SPAs)
Port density per SPA	2*, 5, 8, or 10 Gigabit Ethernet ports * Usable in combination of SFP and RJ-45 ports for a total of 2 Gigabit Ethernet ports
Physical interfaces	*Short wavelength (SX) *Long reach/long haul (LX/LH) *Extended distance (ZX) SFP *SFP-GE-T (5-, 8-, and 10-port Gigabit Ethernet SPAs) *Built-in RJ-45 (2-port Gigabit Ethernet SPA)
Reliability and availability	*OIR of the SPA within the SIP and the optics within the SPA *Field-replaceable SFP optical modules
Physical specifications	8-port Gigabit Ethernet SPAs: ● Weight: 0.75 lb (0.34 kg) ● Height: 0.8 in. (2.03 cm) (single height) ● Width: 6.75 in. (17.15 cm) ● Depth: 7.28 in. (18.49 cm)
Power	● 8-port Gigabit Ethernet SPA: 20W (with SX and LX optics); 22.3W (with ZX optics)

Quick Spec

Brand	Cisco
Model	EHWIC-4G-LTE-BE
Network Compatibility	Bell, Telus, Rogers
Band Support	LTE AWS band 4 (1700/2100 MHz)
Interface	High-Speed WAN Interface Card (HWIC)

Product Features

• ● ● Supports LTE AWS band 4 frequencies (1700/2100 MHz).
• ● ● Compatible with Bell, Telus, and Rogers networks in Canada.
• ● ● High-speed mobile internet connectivity for business continuity.
• ● ● Simple integration into existing Cisco router architectures.
• ● ● Enhanced security for mobile data transmissions.

Product Applications

• ● ● Backup internet connection for businesses to maintain productivity during primary network outages.
• ● ● Remote locations requiring reliable internet access where wired connections are impractical.
• ● ● Mobile networks for transport services, providing passengers with continuous internet access.

Supported Options

Accessory	Model
4G Antenna	ANT-4G-SR-MM
External Power Supply	PWR-IE50W-AC
Cisco Router	ISR4331/K9

Compare to Similar Items

Model	Differences
Cisco EHWIC-3G-HSPA+	Supports HSPA+ networks, slower than 4G LTE.
Cisco EHWIC-4G-LTE-V	Designed for Verizon networks, not compatible with Canadian providers.
Cisco EHWIC-4G-LTE-G	Primarily supports European GSM networks, different frequency bands.

Quick Spec

The figure shows the appearance of NIM-ES2-8.   Table 1 shows the quick spec.

Product Number	NIM-ES2-8
Product Description	8-Port Layer 2?Gigabit Ethernet Switch Module NIM
Form Factor	Single-wide NIM form factor
Dimensions (H x W x D)	0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
Weight	108g (0.24 lb)

Supported Devices

Table 2 shows the supported devices for the NIM-ES2-8.

Product number	Model	Description
CISCO ISR4221/K9	Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB)	35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM
CISCO ISR4221-SEC/K9	Cisco ISR 4221 SEC Bundle with SEC lic	35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, SEC Bundle with SEC lic
Cisco ISR4321/K9	Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base)	50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9	Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base)	100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9	Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base)	200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9	Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base)	500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3?shows the comparison between NIM-ES2-8?and NIM-ES2-8-P.

Product Number	NIM-ES2-8	NIM-ES2-8-P
Product Description	8-Port Layer 2?Gigabit Ethernet Switch Module NIM	8-port PoE/PoE+ Layer 2 Gigabit Ethernet LAN Switch NIM
Supported Devices	Cisco 4000 Series Integrated Services Router	Cisco 4000 Series Integrated Services Router
Dimensions (H x W x D)	0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)	0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
Weight	108g (0.24 lb)	149g (0.33 lb)